Tire/Lift Combo: *Photos Wanted*

[Mahamotorworks]

I wanted to start a thread that would help people figure out what Tire/Lift Combo would work best for them. It will also help people decide what they want their Jeep to look like.

It is basic what I am looking for:

Tire Size and Make
Rim Size and Make
How Much Lift
What Type of Lift
If you had to trim your Wheel Openings
A photo from the side so people can see what it looks like.

Along with any other info you feel would help people decide what Tire/Lift combo they want to run, such as what you do mostly with you Jeep

I wish I could go first but I am still trying to decide what size tires to run, and how much lift to go with.

I would like to put something together like this: http://www.ifsja.org/forums/vb/showthread.php?t=44404 but with photos.

Thanks

MAHA

[Dirtball]

34x10.50 Swamper LTBs, 15x7 Waggy wheels, 6 inch Hell Creek lift (gee, this is looking a lot like my sig... lol)

No trimming so far... I pulled it up on some big rocks in my yard and on a steep slope and stuffed the wheels all I could and did not hit anything... even the back ones.

[jeepfan93]

3 inch lift 31 inch tires stock wheels off a 79

[xsonmyeyes]

Not a real good pic but here's a 3" body lift on a Wag w/31" BFG's before I re-located the bumpers. Stock rims and just slight off-roading...Haven't been brave enough to get any real flex yet!! This is a cheap way to go but has it's own set of headaches when doing the install. My next skyward move is a 2" spring lift from BJ's for 5" of lift and I won't have to change brake lines or go with a drop pitman arm!

[Tad]

From almost exactly a year ago:
36x12.5x16.5's (running 315x75Rx16's now)
Stock GM 16.5x6 rims (running 16x8's now)
12 3/4" Lift
SOA (6 3/4), 2" Body Lift, 2" Springs (GM 63's in back) about 2" in tires over stock.
A bit of fender trimming
HD44 Front, 14-Bolt Rear (welded), 4.10's
Buick 350, TH400, Dodge NP208

A bit more paint added along with a few more lbs, dents and rust over the last year.
Link to build is in sig (It's Time).

[fulsizjeep]

1988 GW - 4" Black Diamond lift installed in 97. This included 4" front spring pack, rear 2" AAL and 2" block. 4 BD shocks all around. 1" shackle lift added to front in April 06 along with longer RS5000 shocks. Wheels: cheap 15x8 white spokes w/3.75" backspacing Tires: 33x12.5x15 Baja Widetrack MT. Rear fenders trimmed 1.5" and sealed with RTV. Front fenders trimmed to fit bumper. edit: Axles are D44s w/3.73 gears and a Lockright in the back.

[JeepinPete]

4" lift, 35 BFG ATs, 15" x 10" wheels. The tires do contact the flares when crossed up.

[Rob z]

BJ's 2" spring lift, BFG 31x10.50 15", 15x8 Jeep 5 slot wheels.

[AlsChopShop]

Tire Size and Make: 30X9.50X15 michelin xlc
Rim Size and Make: stock 8x15 white wagons
How Much Lift: none
had to trim your Wheel Openings: are you kidding?




Tire Size and Make: 33X12.50X15 bfg m/t
Rim Size and Make: stock 15x8 white wagons
How Much Lift: none
had to trim your Wheel Openings: no, but they touched the front fenders at full turn at stuff.




Tire Size and Make: 33X12.50X15 bfg m/t
Rim Size and Make: stock 15x8 white wagons
How Much Lift: ~2.5" lift springs (rancho?) and 2" block rear.
had to trim your Wheel Openings: no.




Tire Size and Make: 33X12.50X15 no name tires.
Rim Size and Make: 15x8.25
How Much Lift: ~2.5" lift springs (rancho?), 2" block rear, 2" body lift and chevy rear shackles up front (+1").
had to trim your Wheel Openings: no.



sorry, no real pictures of it in one piece just yet..

Al

[brielly]

lift2.jpg
BJ's 4 in. BFG 31x10.50 33's would look better but they will have to wait

[mattmopar440]

4" BJS OFFROAD lift wait still on 31"BFmudterrains my go 32" don't know yet

[Kali]

3" Rough Country springs in front, blocks in rear
31" BFG A/T
15x7 US wheels




UPDATE:
3" Rough Country Lift
15x8.5" Outlaw II Wheels
33x12.50x15 BF Goodrich A/T KOs

[AILapua]

33x12.50 15, Pacer rims, one spring added all around.

[N2Jeeps]

1986 GW
4" BJ's all spring lift
2" BJ's body lift
NO fender trimming needed
33x12.5x15 ProComp MTs
Pro Comp 1069 wheels with 3.75" backspacing

[COLOFIREMAN]

This was when I had,
6" superlift front springs
4" superlift rears with 2 added leafs and a shackle flip.
This allows the rear to sit up 1.5" higher than the front for towing and gear without sagging.
3" Body lift w/springs on the bolts for flex
1" longer front shackle from the rear of a 88 chevy truck.
All this allows me to use 35" on a 15x10 3.75 offset rim with no fender contact at full stuff.
When I cut the fender to put the 39" on it I plan to do so without any additional lift.