If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I need a set of front lower leaf spring plates for J-10 or 20. Same part I believe
shipping to 13626
1985 J-20 401 6 inch lift, 37's plow truck. CURRENT PROJECT
1986 CJ 7 360 T-18 granny low Dana 44 , 4 inch lift 35's
1882 CJ 7 360 727 auto Dana 60's 35's cage
1970 AMX was SCCA B production. 390 cross ram. GOOGLE IT
these are super cool if you have not see them. I am considering them myself:
Originally posted by rocklaurence
I have a New Product- High Clearance front U bolt plates. These plates move the bolts and studs up and out of the way allowing the springs to slide over obstacles. They have a Sway bar stud for the FSJ, fully welded and fit all FSJs 1974-90. Ill have these listed on the site soon but you can see them on Instagram.
1985 J-20 401 6 inch lift, 37's plow truck. CURRENT PROJECT
1986 CJ 7 360 T-18 granny low Dana 44 , 4 inch lift 35's
1882 CJ 7 360 727 auto Dana 60's 35's cage
1970 AMX was SCCA B production. 390 cross ram. GOOGLE IT
Actually I installed a narrowed J-20 Dana 44 in my CJ 7 and was going to use them on that project
1985 J-20 401 6 inch lift, 37's plow truck. CURRENT PROJECT
1986 CJ 7 360 T-18 granny low Dana 44 , 4 inch lift 35's
1882 CJ 7 360 727 auto Dana 60's 35's cage
1970 AMX was SCCA B production. 390 cross ram. GOOGLE IT
Vintage Auto Parts Manufactoring & Assembly - Located In Lakeland Florida Selling Vintage Parts For Old Jeeps; J10 Wagoneer, Mecededs; W123 W126, Iron Transmissions and Transfer cases, Axle parts
Sic friatur crustulum
'84 GW with Nissan SD33T, early Chev NV4500, 300, narrowed Ford reverse 44, narrowed Ford 60, SOA/reversed shackle in fornt, lowered mount/flipped shackle in rear.
Comment