Tweet
So I am redoing my cooling system and I am wanting to do an aluminium radiator to upgrade but the one from bj's is a little out of my price range since i am doing the entire cooling system. I ran across this one on the web and i was wondering if anyone had any info on these or the company?
-
91 Grand Wagoneer
AMC 360 / Torqueflight 727 / NPM 229
Dana 44 front and rear
6" Rustys Offroad suspension lift
BJ's quick disconnects
BJ's PreRunner front bumper with winch plate
fenders trimmed
35x12.50x15's Maxxis Bighorn mudders
Rhino grill
http://www.tnjeeps.com/
-
i have one. it's fine. 3 row.Originally posted by Hankrod
Originally posted by Fasts79Chief
Originally posted by Fasts79Chief
It's like you're unraveling a big cable-knit sweater that someone keeps knitting...and knitting...and knitting...and knitting... -
Notice the 3 row is $13 cheaper than the 2 row?
Going to bookmark the link for sure, though! Thanks.
Hm, wonder how I'd use that with a 5.3..... Top hose would be easy, bottom, not so much.Last edited by j20owner; 06-16-2012, 07:48 PM.Where is my axle?
79 j20/84 GW GM HybridComment
-
Well if Ristow had it and says its ok then its going in the jeep!
91 Grand Wagoneer
AMC 360 / Torqueflight 727 / NPM 229
Dana 44 front and rear
6" Rustys Offroad suspension lift
BJ's quick disconnects
BJ's PreRunner front bumper with winch plate
fenders trimmed
35x12.50x15's Maxxis Bighorn mudders
Rhino grill
http://www.tnjeeps.com/
Comment
-
Haha!Originally posted by jwalton23Well if Ristow had it and says its ok then its going in the jeep!
Where is my axle?
79 j20/84 GW GM HybridComment
-
Perfect timing on this thread. Going to order one now. I called the BJ's the other day and they are backordered. The Striper Bite is on and coolant leaks while beach driving are prohibited by me. Can't wait any more to go fishing. ThanksJennifer: 89 GW 360/727/D44 2"lift 31" BF KM2
Harriett: 97 chevy 2500 ext cab P/U 6.5 TD
Lorraine: 73 Datsun 240z
07 Colorado
http://s1196.photobucket.com/albums/aa416/hookedup50/Comment
-
Save some more same radiator cheaper & no shipping cost same warrantee.
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
It's where I bought mine.Last edited by serehill; 06-17-2012, 08:46 AM.
80 Cherokee
360 ci 727 with
Comp cams 270 h
NP208
Edlebrock performer intake
Holley 4180
Msd total multi spark.
4" rusty's springs
Member, FSJ Prissy Restoration Association
If you can't make it better why waste your time. No use repeating the orignal mistakes. I'm to old to push it that's why.Comment
-
-
Engine Oil Cooler? Transmission Oil Cooler?Originally posted by j20owner
Just guessing...David
'78 J-10; '78 J-20 8400GVW
'79 Cherokee
'50 Willys (not Willy's) 4WD PickupComment
-
Experiment
I'm going to try one of these in the Commando the tubes are huge.
80 Cherokee
360 ci 727 with
Comp cams 270 h
NP208
Edlebrock performer intake
Holley 4180
Msd total multi spark.
4" rusty's springs
Member, FSJ Prissy Restoration Association
If you can't make it better why waste your time. No use repeating the orignal mistakes. I'm to old to push it that's why.Comment
-
Ok so my radiator came today and I noticed that it is mounted on much more of an angle than the stock radiator. Which concerns me with the ac condenser being in front of it. Were there firmament issues when you guys installed yours?91 Grand Wagoneer
AMC 360 / Torqueflight 727 / NPM 229
Dana 44 front and rear
6" Rustys Offroad suspension lift
BJ's quick disconnects
BJ's PreRunner front bumper with winch plate
fenders trimmed
35x12.50x15's Maxxis Bighorn mudders
Rhino grill
http://www.tnjeeps.com/
Comment
-
might have been a little overcast/rain but no biggie.Originally posted by Hankrod
Originally posted by Fasts79Chief
Originally posted by Fasts79Chief
It's like you're unraveling a big cable-knit sweater that someone keeps knitting...and knitting...and knitting...and knitting...Comment
-
I looked at several online and it seams they are all made in China and look identical. Odered the 3 row from the original link. I had to space it a little to keep it off the AC condenser and rework the holes on the drivers side to keep it high enough not to sit on the steering box. Its been in about a month and I'm happy so far89 Grand Wagoneer 360/727/229/D44 on both ends trimmed fenders 4in lift and 33x12.50 Pro Comp MTComment
-
Heh. I learned a new word.Originally posted by RistowTim Reese
Maine beekeeper's truck: '77 J10 LWB, 258/T15/D20/3.54 bone stock, low options (delete radio), PS, hubcaps.
Browless and proud: '82 J20 360/T18/NP208/3.73, Destination ATs, 7600 GVWR
Copper Polly: '75 CJ-6, 304/T15, PS, BFG KM2s, soft top
GTI without the badges: '95 VW Golf Sport 2000cc 2D
ECO Green: '15 FCA Jeep Cherokee KL TrailhawkComment
-
I ordered the one from the second link(serehill). Will report on fitment when it arrives and install it.Jennifer: 89 GW 360/727/D44 2"lift 31" BF KM2
Harriett: 97 chevy 2500 ext cab P/U 6.5 TD
Lorraine: 73 Datsun 240z
07 Colorado
http://s1196.photobucket.com/albums/aa416/hookedup50/Comment
Comment