Thread: Lift Blocks
View Single Post
  #2  
Old 11-30-2000, 02:32 AM
Manhattan Manhattan is offline
Bleedin' Gasoline
 
Join Date: Jul 30, 2000
Location: East Coast
Posts: 1,673
Post

My guess is that you'll be fine with no degree shims or degreed blocks. I'll bet that your springs have sagged enough that the lift will get you just back to factory height or little over.

I installed 3" springs on my '88 GW with no shims - and no problems. The net gain was 5.5". I can assume, if they where really 3" springs, that my factory springs had sagged 2.5"

If I had added 2" blocks, I would have been right about where the GW came off the assembly line... no shim needed.



------------------
a.k.a."Bushwood" '88 G-Wag' New 360, 3" Springs, 31" ATs, Custom Roof Rack, 2.5" Dynomax Exhaust... rest stock.
Reply With Quote