I do not have pics being the door is assembled on the truck. I may pull it apart to clean it this weekend. If I do, I will get pics of what I’m looking for.
I need the parts you swapped from your pre 1979 door into the 1983 door. From a front door, not a rear door though.
I need the strikers...
The lock assemblies are screwed to the inside rear of the door and engage the striker to hold the door closed. It is held in with 3 tapered screws that face the striker when closed.
The remote assembly. It is screwed to the door with 3 screws and has a linkage that attaches to the lock mechanism assembly (described above) and the interior door handle slides on and is held in place with a single screw in the center.
1974 Jeep J20, gladiator grill, 6BTA JWAC cummins, HX55, 4in exhaust to 5in stack, nv4500/ford np205, 14b kingpin axle, 14b rear axle, 4.56 gears, 40x13.50r17's on 17x10 mags
G56 6 speed with dual disk clutch
Vintage air AC and Heat underdash combo unit
Last edited by BA_051 : 10-15-2020 at 08:59 PM.