View Single Post
  #1  
Old 08-23-2020, 12:09 PM
BA_051 BA_051 is offline
232 I6
 
Join Date: May 06, 2008
Location: Albuquerque, NM
Posts: 206
74-79 Drivers door release mechanism

Well it seems my door is a bit tight with the aftermarket weatherstripping and today when i tried to exit my truck, the door handle broke off...

I need the door release mechanism that the handle bolts onto and it attached to the door. Not sure if all years are the same.

If someone is parting out a driver and passenger door, I will take the lock mechanisms and release mechanisms as well.

My doors do not have the loop on the jamb, they have the cup with the notch... hard to describe. I will get pics of it.
__________________
1974 Jeep J20, gladiator grill, 6BTA JWAC cummins, HX55, 4in exhaust to 5in stack, nv4500/ford np205, 14b kingpin axle, 14b rear axle, 4.56 gears, 40x13.50r17's on 17x10 mags

Future mods:
G56 6 speed with dual disk clutch
Vintage air AC and Heat underdash combo unit

Last edited by BA_051 : 10-18-2020 at 04:18 PM.
Reply With Quote