Spike TV's Ian Johnson of Extreme 4x4 contacted me several months ago wanting to buy our brand new patented weldable clamps. A few weeks ago he used them on his show to mount the light bar on the freshly powder coated roll cage of the green S10 crawler. Since that time we have been very busy filling orders for the off road community. Its a very simple little devise used to mount any accessory to tubing (square or round) or flat bar, then welding the tubing to the clamp...
http://www.powerblocktv.com/sites/xt...01&ep_sea=0901
Above the weldable Saddle morphs to the size tube that is used for the accessory. The clamps are available to fit tubing from 1" to 2 1/4" with the same sizes available for the saddles.
Im an Off Road / Hot rod Fabricator and found the need to attach light bars, roof racks and other accessories to painted and powder coated surfaces with out messing up the expensive finishes. Hence the Bengel Clamp. Feel free to visit my site at
www.bengelsoff-road.com. I have already received a lot of feedback on how much time, labor, and money these clamps are saving my customers. Let me know how we can help with your project.
Thanks,
Metal Twister
Linear Mode
