727 trans shift points?

[Dogs-in-the-back]

Hi all,

I'm looking for the proper engine rpm upshift points at full power for 1-2 and 2-3 on my 727 trans.
Are these adjustable w/o rebuilding the trans?

The throttle position linkage does go all the way at full throttle, but the trans dosen't like to run the gears out very far. I'm pretty sure my new motor would like a few more revs when I stomp on it.

This is on a GW with 3.31 gears and what I'm pretty sure is the non-lockup verson 727.

[crispyboy]

I adjusted my throttle linkage until it felt right to my driving style. Not sure if it was right or wrong but it feels right.
Should be a procedure in the manual.

[gsmikie]

make sure the bands are adjusted