For those running GM TBI on stock 350

[Gramps Old Jeep]

I am looking for a base line set-up for my GM TBI project. I am installing a GM TBI with 55# (206's) injectors, using a MegaSquirt controller.

I realize not many are using MegaSquirt, but the inputs should essentially be the same regardless of the computer running them (at least that's my theory).

My motor is stock with the exception of removing all smog including EGR.

I need things like pulse width, open & close time, squirts per ignition event, an IAC stepper to temp schedule, Ignition advance curve, etc.

Does anyone have a bin file with this information in a readable form?

I really would appreciate it.

Thanks

Ken

[Gramps Old Jeep]

Anybody?

[AlsChopShop]

sign up on chevytalk.org and private message 1983G20Van, he'll probably be able to help you out.

also there is an EFI forum down towards the bottom of the forum list.

Al

[chipotle]

There are some BIN's here as well:
http://www.tyndall.ca/jeep/tbi/

Not that they did me any good with my non-supported CustomEFI kit, nor it's original BIN. However, I have a stock GM ECU, that is running my 360 quite nicely with all smog equip attached and NOC sensor.