Parts for J20, same as Wagoneer?

[mknherhappy]

Is there a source for new parts for a J20, or do you have to rely on used parts? I checked Quadratec, but no luck. Are there alot of similar parts that the Wagoneer uses?

Any help would be appreciated

[FSJ Guy]

What parts?

Some fit, some don't. Depends on what you're looking for and what year your truck is.

[mknherhappy]

Originally Posted by FSJ Guy

What parts?

Some fit, some don't. Depends on what you're looking for and what year your truck is.

Its a 1980, looking for floor pans, side mirrors, rear bumper.

Thank you.

[Sian09]

Check out z&m jeep parts or BJ's and the vendor sections! They have everything you're looking for!

[mrtazwrench]

Originally Posted by mknherhappy

Its a 1980, looking for floor pans, side mirrors, rear bumper.

Thank you.

I posted on your mirror thread, I have a homade rear bumper with a reciever in it that I just took off my J20, It's a little narrow though, would look better on a sportside, still if you're willing to drive up to SE MN it might work for you.

[Logs0012]

mrtazwrench: Do you think you could email pics of your bumper to:
Logs0012@windstream.net

[mrtazwrench]

Originally Posted by Logs0012

mrtazwrench: Do you think you could email pics of your bumper to:
Logs0012@windstream.net

Not really looking to ship it, and any pics will be with it not installed, also had I not found a reciever hitch so I could go back to my stock bumper I would have added some sort of filler between the bed and bumper beam. This was welded to some stock brackets so it's bolt on, braced also as I pulled my car trailer loaded down with it heavy to ship.

[Logs0012]

I just want to get ideas.

[mrtazwrench]

Originally Posted by Logs0012

I just want to get ideas.

I'll try to get pics, I also have one that from what I was told was built by a welding shop in the 70's came from a 78 J20 and I put it on my 82 J20, it is a much better looking bumper, but it has a ball mount area instead of a reciever.