When I purchased my jeep 5 months ago I got it running and took it for a test drive. I "think" the oil pressure guage was working. After working on the truck daily for the past 4 months, I took it for a test drive yesterday. The oil pressure guage did not register a reading, darn!
Question is, what's the best way with check it? I'm thinking about removing one of the valve covers and just see if the oil comes up. I am sure the pump did work in the past because when it ran, half the oil poured out the left value cover and down the block.
It is a 1978 J10 with a 360 2b
Question is, what's the best way with check it? I'm thinking about removing one of the valve covers and just see if the oil comes up. I am sure the pump did work in the past because when it ran, half the oil poured out the left value cover and down the block.
It is a 1978 J10 with a 360 2b
Comment