Parting out 3 FSJ's

[gopher_6_9]

How about a gauge cluster to fit an 83? Gauges not really important, really just needing the bezel for the gauges and heater controls, but would buy the assembly if price was reasonable.

Driver side seat switch in good shape?

3 piece trim that goes on the rear around the roof area with good clips? I think I only need the drivers side, but again would consider buying the set if price was reasonable.

[levelhead]

jeep parts

I probably have all those but I'm away from home till begining of May....If you can wait I can help you then

[elskeptico]

Got a driver's side wing window assembly? Don't care if the rubber is bad.

[levelhead]

PM sent

[Thomas792]

Door frames

Need the frames on the top of the doors. Mine are all rusted due to the stainless window valance screws.

[fsj454]

Rubber body bushings with washers and bolts

Hi how are the body bushings on the 1988 . And radiator support bushings and hardware .

[cherokee83]

1980 jeep Cherokee interested in the front/rear Dana 44s also transfer case

[levelhead]

pms sent

[Wagoneer Taylor]

78-80 Gauge cluster

Any chance the 78 or 80 have the gauge cluster still in them? I have the bezel, need the gauges/circuit board.

[levelhead]

Both have the gauge clusters...pm sent

[MikHenderson]

Cruise control

I have a 79 J10. I could also use a lens for the instrument panel/gauge cluster.

[levelhead]

PM sent

[orangebang]

Any chance you have the dust shield that goes between the 360 or 401 and a turbo 400.

[levelhead]

I have the shields from a 79 Wag 360/th400 ......PM sent.

[mx71]

black armrests from the 78 or black a/c vents from the 78 or 80?