Anybody have a recommendation for a shop here in Missouri to do a fresh-up of an AMC 401, once I pull it?
I am planning to pull the AMC 401 out of an old J20 of mine and swap it into my 1979 Cherokee Chief.
Don't know much about the engine, other than it does turn over. The previous owner said that it ran fine, but he was having carb issues. He used this as a reason for purchasing a J10 with a 401. He stripped a few parts off of the J20 401, like the thermostat housing and the oil cap. So these areas have been uncovered for an unknown amount of time. This is why I thought I should have the engine checked before I install it.
Any recommendations for a reputable shop that has experience with AMC V8s would be greatly appreciated.
Thanks.
I am planning to pull the AMC 401 out of an old J20 of mine and swap it into my 1979 Cherokee Chief.
Don't know much about the engine, other than it does turn over. The previous owner said that it ran fine, but he was having carb issues. He used this as a reason for purchasing a J10 with a 401. He stripped a few parts off of the J20 401, like the thermostat housing and the oil cap. So these areas have been uncovered for an unknown amount of time. This is why I thought I should have the engine checked before I install it.
Any recommendations for a reputable shop that has experience with AMC V8s would be greatly appreciated.
Thanks.
Comment