International Full Size Jeep Association
Home Forums Reader's Rigs Tech Library Trail Stories FSJ-List
International Full Size Jeep Association  

Go Back   International Full Size Jeep Association > Tire Kickin' > General FSJ Tech

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-24-2007, 05:53 PM
Captain Jeff's Avatar
Captain Jeff Captain Jeff is offline
Member
 
Join Date: Jan 09, 2006
Location: Northeast Ohio
Posts: 70
Q-trac input seals

Has anyone bought input shaft seals for their QT from NAPA? I had my NAPA guy look it up today, and he got a part # for it. My question is do both seals come in one box, or do I have to order 2 ???? The guy at the store didn't know. The outer seal has a cr (chicago rawhide) number, so it can be looked up, but the inner is not marked.
Just wondering if anyone else has gone this route?

Jeff
Reply With Quote
  #2  
Old 10-24-2007, 06:53 PM
gsmikie's Avatar
gsmikie gsmikie is offline
Auto Trannie God
 
Join Date: Feb 18, 2001
Location: Bouse,az
Posts: 10,550
you have to order 2 and dont forget to change the o-ring on the trans output shaft
__________________
I\'ve seen gsmikie\'s video for the TH400 and thought it was just awful.watching a guy tear down a greasy pile of metal in a junkyard. it dosent have to be surrounded by water to be an island
Reply With Quote
  #3  
Old 10-24-2007, 06:55 PM
PlasticBoob's Avatar
PlasticBoob PlasticBoob is offline
All Makes Combined
 
Join Date: Jun 30, 2003
Location: Long Beach, CA
Posts: 3,933
hijack: GSMikie, do all TH400s have this o-ring? I read your advice from previous threads and looked but did not notice one on my '74.
__________________
Rob
1974 Cherokee S, fuel injected 401, Trans-am Red, Aussie locker 'out back'
Click for video

The Southern California FSJ forum
Reply With Quote
  #4  
Old 10-24-2007, 08:27 PM
fulsizjeep's Avatar
fulsizjeep fulsizjeep is offline
Señor Jackhead
 
Join Date: Aug 21, 2002
Location: Jubilee Jeeps.SWCO
Posts: 22,224
The rear of the tranny seals to the QT with a gasket and the QT input seals. No o-ring involved there. The QT input seals are identical part and you order 2 each. One is to keep the QT fluid in the QT and the other is to keep the ATF out. There is a seep hole in between the seals so they go in a certain place to allow the seep hole to do it's job. The seep hole is to allow you to see if one or the other or both seal(s) is leaking.
__________________
Flint
Ran when parked.
http://jubileejeeps.org/quadratrac
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s and a few Evil Twin mods, http://eviltwinfab.com and a few TT's Fabworks mods, http://www.ttsfabworks.com
76 401 Wag, 77 401 Wag, 77 401 J20
Reply With Quote
  #5  
Old 10-25-2007, 06:01 AM
Captain Jeff's Avatar
Captain Jeff Captain Jeff is offline
Member
 
Join Date: Jan 09, 2006
Location: Northeast Ohio
Posts: 70
Thanks Flint, and others. I know how it goes together, I just didn't know if the two seals were the same part #. Anyway, just ordered a full seal kit from 4wd.com for 20.99 and 10% discount. $25 shipped for a full seal kit, Napa wanted $10 a piece for the seals.
Reply With Quote
  #6  
Old 10-25-2007, 06:09 AM
fulsizjeep's Avatar
fulsizjeep fulsizjeep is offline
Señor Jackhead
 
Join Date: Aug 21, 2002
Location: Jubilee Jeeps.SWCO
Posts: 22,224
Heck of a deal! Sometimes I go on because so many of these I have found where a PO has plugged that seep hole with RTV. "it's fixed now"
__________________
Flint
Ran when parked.
http://jubileejeeps.org/quadratrac
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s and a few Evil Twin mods, http://eviltwinfab.com and a few TT's Fabworks mods, http://www.ttsfabworks.com
76 401 Wag, 77 401 Wag, 77 401 J20
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:13 PM.


Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
corner corner