Steering column gear indicator pointer?

[Strode]

What other makes/models of cars/trucks have a similar white gear pointer indicator on the steering column that will fit our FSJs?

I broke mine, and have been scouting the junkyards, and haven't come across any GM products that have that white pointer.

Is that design a Jeep only design? I was thinking GM & Chevy trucks would have something, but haven't seen any.....

[Lindel]

That was one of the unique items of Jeeps. You'll have to see if someone has one, or if you can find one at a salvage yard.

[78 WIDETRAC]

I pulled mine. shoot me your address and i will put it in an envelope to you.

[Strode]

I pulled mine. shoot me your address and i will put it in an envelope to you.

Thanks, WT. PM sent

[78 WIDETRAC]

Got pm. Going out tomorrow.

[alagetter]

shift indicator

I found this on http://www.classicparts.com/Dash-Par...ducts/268/12/0 its for a saginaw column. I know you have one on the way but this may help some else.

[Strode]

I found this on http://www.classicparts.com/Dash-Par...ducts/268/12/0 its for a saginaw column. I know you have one on the way but this may help some else.

Cool, there it is. So it's the same column as 71-72 GM truck? Good to know. Thanks for posting that.

[alagetter]

gm trucks

I think the 67-72 gm trucks with tilt. The whole shift selector looks the same as jeep. My neighbor restore a 72 he got that piece from LMC with new glass and mount. It looked and fit great.

[rocklaurence]

How do you remove the pointer? I have to replace mine as well.

[78 WIDETRAC]

Dropped in a mail box tonight. Its on its way to Colorado.

[Strode]

Dropped in a mail box tonight. Its on its way to Colorado.

Thanks again, much appreciated.

[rockrollin]

Team Grand Wagoner carries that part as well. A little pricey though.

[jaber]

How do you remove the pointer? I have to replace mine as well.

You have to unclip the plastic part off and then the needle pulls out toward the steering wheel. The plastic will be brittle so be gentle with it.

[Strode]

You have to unclip the plastic part off and then the needle pulls out toward the steering wheel. The plastic will be brittle so be gentle with it.

And when I took my cover off, I wasn't aware of the little "V" clip on the backside. I boogered that up too. You need to pull the little V clip out from the back on the cover to get it off.

[Dr_Jim]

I found the one at TGW....way too pricey.
I went to a hobby store,...got some 'model' plastic....and fabbed one up in no time!...Filed it all nice,....dab of day glow orange on the tip.....worked out great.
Price: 77cents.