International Full Size Jeep Association
Home Forums Reader's Rigs Tech Library Trail Stories FSJ-List
International Full Size Jeep Association  

Go Back   International Full Size Jeep Association > Tire Kickin' > General FSJ Tech

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-24-2019, 08:57 AM
offthebeatenpath offthebeatenpath is offline
230 Tornado
 
Join Date: May 31, 2019
Location: MT
Posts: 22
Floor pans??

Getting ready to order some sheetmetal for the floor pans, and I've got a couple questions.
1 - So far, I've found BJ's, ZM Jeeps, and Classic 2 Current that sell pieces. Or, I could go pick up a sheet and muddle my way through myself. I can weld(ish), but I don't have a brake. Any other sources I should look at?

2 - BJ's states that the dimensions of their part is 22" x 18.5". My floors are rusty enough that one piece won't cover what I need. What's the best route to get the amount I need? Order 2 driver's side fronts and 2 passenger's side fronts, or order a front and rear (from a Waggy) for each side?

C2C has the best pricing, currently at $230 delivered for all four pieces
Reply With Quote
  #2  
Old 06-24-2019, 06:54 PM
Bkgw Bkgw is offline
232 I6
 
Join Date: Feb 11, 2016
Location: Leland, Il
Posts: 86
I ordered from Zachs and I think they were actually dropped shipped from c2c.
Reply With Quote
  #3  
Old 06-24-2019, 08:09 PM
Rusty76 Rusty76 is offline
232 I6
 
Join Date: Jul 15, 2018
Location: Cochrane
Posts: 86
I ordered the C2C floorpans and was happy how they fit. Did need lots of trimming
but that sounds like the name of the game. The price was right and I would order them again. I didn't have the same luck with the rockers. They required lots of work
to fit ok at best. Hope this helps. Good Luck

IMG_5176 by , on Flickr

IMG_5294 by , on Flickr
Reply With Quote
  #4  
Old 06-25-2019, 07:10 AM
offthebeatenpath offthebeatenpath is offline
230 Tornado
 
Join Date: May 31, 2019
Location: MT
Posts: 22
Thanks guys, that's helpful. Thankfully, my rockers are fairly solid, it's just the pans that are shot.

I'll get them ordered!
Reply With Quote
  #5  
Old 06-28-2019, 10:47 AM
miracleed's Avatar
miracleed miracleed is offline
232 I6
 
Join Date: Feb 19, 2019
Location: Massachusetts
Posts: 53
I ordered the front passenger side from BJ's. It's good quality. I ordered the rears from C2C because they were like half price. The pieces I received look like someone ordered them and returned them to C2C before they finally got sent to me. There's nothing wrong with them but they have pencil marks and other indicators that some gearhead somewhere had their mitts on them. I think they were a stronger gauge than the ones advertised though. I also got the little moon pieces (in front of the rear wheel well) from BJ's. I'm debating cutting out the PO installed driver's side floor just 'cause. If I do I'll get that piece from BJ's. I can see the quality difference in the support bends and stuff like that.

Now I just need to find someone selling a replacement 16ga trans hub and I'm all set... and maybe a firewall.
__________________
rang-a-stang made me do it.
Reply With Quote
  #6  
Old 06-29-2019, 04:45 AM
fsj454 fsj454 is offline
Long time member
 
Join Date: Jan 02, 2015
Location: new bedford ma.
Posts: 448
4 piece set

I also bought 4 piece floor pan set from C2C . It is hit or miss on the quality mine missed on 1 piece . You can find these everywhere for cheap money and free shipping .... I would buy again . Miracleed what is 16ga trans hub .
__________________
1982 cherokee nt. 454. nv4500 .205. dana 60 f+r. twin stick.hydroboost.hydrolic clutch.rock ram.traction bar.warn 12000 winch.4 wheel disc.flip kit.soa.high steer.cross over steer.4.56 detroit locker.35 spline rear alloy axles. 37s .1990 grand wagoneer aka trusty rusty

Last edited by fsj454 : 06-29-2019 at 04:50 AM.
Reply With Quote
  #7  
Old 06-29-2019, 04:59 AM
fsj454 fsj454 is offline
Long time member
 
Join Date: Jan 02, 2015
Location: new bedford ma.
Posts: 448
4 piece set

I also bought 4 piece floor pan set from C2C . It is hit or miss on the quality mine missed on 1 piece . You can find these everywhere for cheap money and free shipping .... I would buy again
__________________
1982 cherokee nt. 454. nv4500 .205. dana 60 f+r. twin stick.hydroboost.hydrolic clutch.rock ram.traction bar.warn 12000 winch.4 wheel disc.flip kit.soa.high steer.cross over steer.4.56 detroit locker.35 spline rear alloy axles. 37s .1990 grand wagoneer aka trusty rusty
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 04:39 AM.


Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
corner corner