Tail light and reverse light to body gasket ?

[Kaiserjeeps]

I also have good info on a rubber edge guard with a long flange on one side. I put it all the way around the tail light housing. It looks original. It is in my build thread (Another 70 wagoneer) Sorry I can't find the page right now. Satellite phone and internet guy is here and I need to shut down for the conversion.

Some good solutions posted though....

[StretchinPA]

It does look good thanks 👍

[StretchinPA]

I also have good info on a rubber edge guard with a long flange on one side. I put it all the way around the tail light housing. It looks original. It is in my build thread (Another 70 wagoneer) Sorry I can't find the page right now. Satellite phone and internet guy is here and I need to shut down for the conversion.

Some good solutions posted though....

I found it on your build thread.

1/32" Rubber Edge Trim 69J 1/32 X 1/2 & 1/8 Black U Channel

I'll try both and see which I like best.

Thanks!

[SJTD]

I found it on your build thread.

1/32" Rubber Edge Trim 69J 1/32 X 1/2 & 1/8 Black U Channel

I'll try both and see which I like best.

Thanks!

Should link it for posterity.

[StretchinPA]

Should link it for posterity.

I was going to but only found it on eBay.

eBay listing;

https://www.ebay.com/itm/1-32-Rubber-Edge-Trim-69J-1-32-X-1-2-1-8-Black-U-Channel-Sold-by-the-foot/223453002371

[SJTD]

I meant Kaiserjeeps thread since he mentioned trying to find it but that's good too.

[StretchinPA]

I meant Kaiserjeeps thread since he mentioned trying to find it but that's good too.

Makes sense.

http://www.ifsja.org/forums/vb/showthread.php?t=121305&page=94

http://www.ifsja.org/forums/vb/showpost.php?p=1706106&postcount=1878

[Kaiserjeeps]

Thanks for finding that info. I had to hang up and go help the satellite install guy dig a hole first in snow then frozen ground. I'm on a new improved system now. That edge guard was awesome to work with and looked super. You will have to pie cut the inner flange to make the serious corners. Like the front most forward part of the chrome housing. Other than that, it was the cats meow.

[deckside]

I was going to but only found it on eBay.

eBay listing;

https://www.ebay.com/itm/1-32-Rubber...t/223453002371

Just picked it up and tried this...leaking worse than the original I replaced Time to try the Frost King gasket...have to wait a few days as not in stock here Home Depot/ Lowes...gotta give more $ to Jeff Bezo's greedy ass