Tweet
guys, let me see your projects for dual end pipe exhaus systems.
Want to do one....
Want to do one....
-
Markus!
Member, FSJ Prissy Restoration Association
Note: Everyone has a plan until they get punched in the face. - Mike Tyson
Cherokee Chief Laredo, 360 cui, selec trac, black, 12/1982
Picture story:
https://picasaweb.google.com/1019823...eat=directlink -
Markus, what's your goal? Looks or performance? Dual exit chrome slip-on tail pipe tips can be had after market or a muffler shop can make you one from exh tubing cheap. For performance I would go with a full dual exh system (with a balance/crossover "H" pipe installed as close to the exh manifolds as possible. I would plumb both the exh pipes down the right side (stock location) of a Wag. A lot cleaner and cheaper than routing the left side past the fuel tank. I would go with 2 1/4 or 2 1/2 inch plumbing for true duals. Or cheaper/easier yet run a stock single exh configuration using 3" pipe. Any local muffler shop can fix you up.joe
"Don't mind me. I'm just here for the alibi"
Comment