International Full Size Jeep Association
Home Forums Reader's Rigs Tech Library Trail Stories FSJ-List
International Full Size Jeep Association  

Go Back   International Full Size Jeep Association > Tire Kickin' > General FSJ Tech

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-28-2003, 12:41 AM
95pontiac 95pontiac is offline
Member
 
Join Date: Nov 24, 2002
Location: Amherst, VA
Posts: 77
Question

Here's what I have done to my 1988 Grand Wagoneer (161,000 miles) to get rid of the approximately 2" of play in the steering wheel:

Replaced tie rod linkage at Pitman arm.
Replaced steering box with a new unit.
Replaced power steering pump (leaking).
Full front-end alignment.

I have been to two shops and they have both told me that the remaining tie rod joints are in good shape - tight. Both wheel bearings have been replaced recently.

I still have the 2" of play - I have tried tightening the allen screw on the new steering box (1/4" turn) and it made the steering more difficult to turn (stiffer), but the play remains. I have blocked the wheels, started the truck, and have found that the steering shaft turns the 2" of slop all the way to where it ties into the steering box. The pad where the steering shaft bolts to the steering box is tight. The U-joint in the steering shaft is tight when I grab both sides of it and turn in opposite directions.

What am I missing? I have got to find where the play is in the steering- it's a handfull out on the road!

Thanks!
Reply With Quote
  #2  
Old 05-28-2003, 02:24 AM
PhilSine PhilSine is offline
Bleedin' Gasoline
 
Join Date: May 25, 2002
Location: Superior, WI
Posts: 2,084
Post

Have you had the ball joints looked at? The steering on my rig is a bit loose at speeds and it is directly related to worn ball joints. I'm not sure if ball joints can wear to the point where they cause your condition but it's worth asking a pro about.
__________________
I can neither define beauty nor obscenity but rather to state that I know them when I see them.
Reply With Quote
  #3  
Old 05-28-2003, 03:25 AM
River Beast River Beast is offline
 
Join Date: Apr 18, 2000
Location: Lakewood, Calif
Posts: 11,643
Post

Check the rag-joint at the box that connects the steering column to the box....
__________________
Todd
www.ttsfabworks.com
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:31 AM.


Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
corner corner