Parts Swaping

[Tad]

I'm wondering if we should have some parts swapping going on this year?

I have some stuff I'd like to clear out of my yard, don't really want anything for it but can toss it on the trailer if someone wants to take it home.

About the only thing I am looking for is an FSJ NP208 floor shifter or parts of one for a buddy here or some hydro-assist parts (I have a tapped box from Nick already, not sure what else I will need).

What I have pic's of so far:
727 from an '82 Chero (lockup version). Rig not running when I got it so I would call it a core.
727 is going to Michael

Class 3 Reciever Hitch for a Wag/Chero.





NP228, Running pull from Ridgbak's '86 GW at 110K.



Under Dash AC Section from the same '82 Chero.


Tranny Cooler Going to Flint and AC Condensor from the '82 Chero.


I still also have this chunk of very nice right rear quarter cut off the '82 Chero.



I'm sure I need other stuff and have other stuff.
If you are coming and want it speak up, I don't want to drag anything there and back.

[Michael]

I think that is a great idea. I call dibs on the 727. I have a few things too, I will just have to sort through it all.

I have a few years old York compressor
I have one that is really old
and another that is even older than really old. Anyone need a york?

Misc, trans coolers

[fulsizjeep]

Good Idear...

Tad - I would like to get that factory Modine tranny cooler please.

I have some things we don't need. Variety of QT parts, no low ranges. Beat up razor grilles. Halfway decent eggcrate grille that I was bringing to donate to the drawing. I'll get a list of stuff together here before too long.

[Tad]

...Anyone need a york?

Ya know, I probably do if I want to go onboard air sommeday (I gave away like 3 of them a few years back).
So yea, thanks.

My List updated in Red for claimed items:

[Heimeken]

Here is a list of a few things I am getting ready to put up for sale.

Dana 44 front axle complete but currently dissassembled. Came out of the choptop but I removed the 8 lug outers to put on the J10 so it is now six lug. Originally from a 87 J20 (driver drop), sprung over with flat-tops knuckles, 4.10 gears and detroit true-trac(LSD).

Two driveshafts from T18/D20 J10. One is stock size(original), the other a bit longer for 6" lift(almost new) .

A couple of brake master cylinders and boosters(late 70's).

Used Radiator from 78 J10.

3 401 flexplates

2 360 flywheels

2 Four barrel intakes (stock for spreadbore)

1 Generator (external regulated from 77) fair condition

[fulsizjeep]

Jaime - Are those 401 flexplates for T400? If so, I am interested in one. Thanks.

[Sambo]

maybe i should dig and see what i might have
i do have a chrome 205 shifter,no nob.

tad i have the 208 shifter you need! btw do you have the rest of the ac unit! the left piece?

[Heimeken]

Yes they are, and they are free + shipping = free to cruces .

Jaime - Are those 401 flexplates for T400? If so, I am interested in one. Thanks.

[Tad]

...tad i have the 208 shifter you need! btw do you have the rest of the ac unit! the left piece?

Great!
Been looking for the shifter for a bit now.
I don't have the left (drivers side piece) wasn't in the WT when I got it.

Do you want me to toss it in the trailer?

Because I'm packing now...



...not that I want to, but I have only an hour or so each night and hhave to work in Phx next Satuday for ASU. That just leaves me a few hours next Sunday morning to finish, hookup and go.

[Sambo]

neah i'll pass.i found one locally the other day...
ok i will toss in the shifter for ya tho

[fulsizjeep]

Yes they are, and they are free + shipping = free to cruces .

Coming in from the Zone... Did I respond to this yet? Please bring one for me Jaime!

I sure wish that Cherokee corner was from the driver's side Tad.


Plus
I have a FSJ NP208 and lock up TF727 up for potential trade. From an early 80s Cherokee. Previous owner said they both worked when he pulled 'em and I trust him. I also have an assortment of QT parts, edrive shifter parts, differential parts, etc depending on what you might need to fix one.

I am looking for a set of good D44 4.56 R&P gears.

[Michael]

Flint I am interested in the np208, bring it and I will either buy it or bring you something you may be inerested in.

Anyone need some front doors?

[fulsizjeep]

OK Michael, holding the 208 for you - $75 will take the it if we don't have any bartering goin on. That is what I have in it. You got a decent used D44 lunch box locker or similar? Hmmm, D60 goodies? 4 bbl carb or intake?

Plus
I have a few spare alternators for various year FSJs, an assortment of AMC V8 pulleys and PS pump bracket to toss up for trades. If someone is interested in me getting pix posted, speak up.

[Tad]

...I sure wish that Cherokee corner was from the driver's side Tad...

Well, if it had been I would have either kept the rig or sold it complete but the hit to that area was way too extensive

[Michael]

Flint-sold my aussie locker last week. Sold my 4bbl intake last month....hmmm if I have nothing I will have good ole cash!!!!