I have a 401 that is going to get 454 TBI slapped on it. Right now I'm on a four barrel intake with a Holley spread bore TBI adapter. If you are up on carbs, you already see the problem: the 4350 spread bore that AMC used is *not* the same spread bore that the Holley adapter was made for.
So, what's the solution here?
It looks like a die grinder might fix my problem.
Would a 2-barrel AMC intake work?
Edelbrock Performer intake?
Some other adapter that is designed for the AMC intake?
I got the Holley adapter free (birthday present) not realizing that "spread bore" wasn't sufficiently detailed. I don't want to spend $300 making a $60 part work, though.
So, what's the solution here?
It looks like a die grinder might fix my problem.
Would a 2-barrel AMC intake work?
Edelbrock Performer intake?
Some other adapter that is designed for the AMC intake?
I got the Holley adapter free (birthday present) not realizing that "spread bore" wasn't sufficiently detailed. I don't want to spend $300 making a $60 part work, though.
Comment