just thought I'd check in (some recent wheeling pics)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • robselina
    304 AMC
    • Feb 26, 2003
    • 1849

    just thought I'd check in (some recent wheeling pics)

    Haven't had much to contribute lately, but thought I'd drop in with an update.

    Here's the waggy nowadays. I've got a little work to do on the 8274 up front (just finish the wiring), needs new front shackles, some fluid leaks patched and the rear winch needs to be reassembled (cover at the machine shop right now).

    Basically I've been slacking off on any mods and most major maintenance and just flogging it every weekend on the trail

    Ran both Saturday and Sunday this weekend.

    Saturday was a pretty short. Started up a local trail called bad hair day. Got through a few of the easier sections, then approaching the first major obstacle, blew the drivers side front axle-shaft into pieces.



    That was basically it for that day. Limped out in 3wd, parked it.

    In the AM I replaced the shaft, went out and ran edge canyon (another trail in the local OHV area).

    The trail kicked my *** a few weeks before, so I was out for revenge [img]tongue.gif[/img]

    Here's a few trail pics from the last couple of trips:





    Revenge is sweet! (me exiting edge)



    Anyway, that's about it, just thought I'd drop in and show everyone my ugly POS is still on the trails!

    More recent pics:











    Cheers,

    Rob

    [ April 04, 2006, 02:25 PM: Message edited by: robselina ]
    Rob
  • J10Mike
    Delightfully Incompetent
    • Jun 04, 2003
    • 5811

    #2
    Welcome back Rob...nice pics...great scenery.
    www.j10mike.com
    Former - 1982 J10 Sportside, 360, TFI, 727/208, J20 axles, D44HD/Detroit TruTrac, D60/Detroit Locker, D60 disk brake conversion, 4.10s, 5 inch Superlift, 35x12.5x16.5 BFGs on AR767 Wheels. Procomp Super Seats. MileMarker 9000 on Cliffhanger front bumper. Dozer II rear bumper. Rhino Grill conversion. NP208 floor shifter conversion.

    Comment

    • Dmntxn77
      Hey watch this...
      • Nov 19, 2004
      • 8329

      #3
      Looks like a TON-A-FUN!!!

      Comment

      • viscacha
        350 Buick
        • Dec 11, 2002
        • 1389

        #4
        Great pics.
        steve

        ?86 J20
        SOA, Dana 60's, F/R Lockers
        Full High Steer, Ram Assist
        Bunch of Other Stuff

        Comment

        • Merc69
          304 AMC
          • Sep 03, 2002
          • 2398

          #5
          Dude that looks like a blast. Glad to see you are still kicking...been wondering where you have been. Not much left of the sheet metal
          Merc69/ Bruce AKA G.O.D. (Grumpy Old Dude)
          "PsyOp" 87 Grand Wagoneer, 360, Powered by Propane, NP-208 t-case, Dana 60 front 4.56 gears-Detroit Locker, Corp 14 bolt 4.56 gears-Detroit Locker. Alcan Springs up front, Chevy 63", Hydraulic Steering

          Under Construction: 4 link rear suspension, Klune-v and Ford 205 transfer case

          Comment

          • bigun
            • Feb 10, 2003
            • 20092

            #6
            Looks like I need to get a locker in mine and bring the crew down to check your area out
            charlie
            KB0HXA
            "Crom" 76/75 Cherokee/J20 Hybred,

            Originally posted by Gambler68
            congrats...that's the first post on here I have absolutely no effing clue how to comment on.
            How you behave toward cats here below determines your status in Heaven.
            Robert A. Heinlein
            The birth of CROM is recorded here
            http://www.alaska4x4network.com/showthread.php?t=7778

            Comment

            • robselina
              304 AMC
              • Feb 26, 2003
              • 1849

              #7
              Originally posted by bigun:
              Looks like I need to get a locker in mine and bring the crew down to check your area out
              more than happy to show you around anytime charlie!

              Originally posted by Merc69:
              Dude that looks like a blast. Glad to see you are still kicking...been wondering where you have been. Not much left of the sheet metal
              I've still got original floor boards!
              Rob

              Comment

              • rstep
                304 AMC
                • Oct 09, 2003
                • 2081

                #8
                Great pics looks like fun.
                77 Cherokee 401/400 trans,Holley on edelbrock performer,PT 1339
                d44s,detriot rear ,diff guards front and rear
                Fabbed front and rear bumpers,Tire carrier
                33"BFG KM2's on black spokes
                Tadrack
                Interior upgraded,Durango console, custom gauge panel,bucket seats
                Soa,with 1" shackle up front
                Hood vents

                Comment

                • Tigger4X
                  AMC 4 OH! 1
                  • Nov 16, 2001
                  • 4339

                  #9
                  Some more pics like those and I think the AZFSJC will have to work up a road trip
                  Originally posted by will e
                  Keep in mind. Getting old is easy. Being old is hard.
                  Post #14 ~ http://www.ifsja.org/forums/vb/showt...=1#post1580206

                  Comment

                  • Sambo
                    AMC 4 OH! 1
                    • Sep 25, 2001
                    • 3585

                    #10
                    yeah i think robs area would be good for a fsj gathering for new mexico,ya know its kinda central
                    i also had been wondering which rock rob was hiding under!

                    dang that thing got a name? how about rock robster! [img]tongue.gif[/img]
                    77 chero DEAD.
                    84wag,360,tf727,???! possiblities are d300 flipped and a ford d44 hp with coils

                    Comment

                    • robselina
                      304 AMC
                      • Feb 26, 2003
                      • 1849

                      #11
                      Originally posted by Sambo:
                      dang that thing got a name?
                      If it's not working, it has a LOT of names!
                      Rob

                      Comment

                      Working...
                      X