My girlfriend wants to leave the trim pieces on... I can't argue with her on it.
The "Goofy" build thread
Collapse
X
-
-
well I started her up after the carb rebuild. she started right up, choke worked perfect and she pulled 17 on the vacuum gauge while idling smooth.
Please come on over to http://fsjnetwork.com/forum and have a look.
Comment
-
-
Man she runs GREAT after rebuilding the carb! Starts right up runs really smooth.
part number 779-1742 is the ford motocraft 2150 float
part number 96-47A is the ford motocraft 2150 rebuilt kit. I only used a few pieces from this kit.
It only took me about 2 hours for the whole job and was easy to do.
Please come on over to http://fsjnetwork.com/forum and have a look.
Comment
-
-
someone rigged up an electric fuel pump for some reason...
and it's leaking...
Please come on over to http://fsjnetwork.com/forum and have a look.
Comment
-
-
I have had more trouble with electric pumps...never understood why mechanicals were so bad - except for FI necessities.
Love this build and will be following suit shortly!78 Wagoneer, 401, Turbo400, QT, Posi Rear, 4" lift, 33X10.5 BFG
69 Gladiator, Buick 350, T18, 14B, 44HD, Cross-over HIgh Steer, Hydroboost, 6" Lift, QR78 Buckshots
63 CJ5, 302 Ford
Owner Buckstop Truckware, Inc
www.buckstop.biz
Comment
-
-
sorry about that blake i had the carb rebuilt by a shop and i thought they put everything back on but i guess not so their gonna hear from me tomarow for sure cuse i told them ever since they some what fixed it that it never ran right again and sorry i didnt know it had an eletric fule pump on it sorry man1977 Mustang 2 limited edtion T-Tops (Orange Juice)
Comment
-
-
Originally posted by Goofysorry about that blake i had the carb rebuilt by a shop and i thought they put everything back on but i guess not so their gonna hear from me tomarow for sure cuse i told them ever since they some what fixed it that it never ran right again and sorry i didnt know it had an eletric fule pump on it sorry man
Hey man - it's all good. I bought a used jeep from ya. I was begging for problems! But yeah, whomever worked on Goofy in the past definitely made mistakes.Please come on over to http://fsjnetwork.com/forum and have a look.
Comment
-
-
Gotta spring for a good pump...knock on wood my loud Holley Red Top has been a champ for years. Plus I can tell from just the change in pitch when its not picking up fuel.
Great build, keep her rollin!1979 Chero S "Sundog" 1979 Chero S "Hammer"
1968 327 J3000 1978 J10SWB
The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.
Hunter S. Thompson .
Comment
-
-
Towed the boat about 50 miles today. She runs better without the broken electric fuel pump.
Also installed a new radiator cap part number
10230. This cap works on my chinese aluminum radiator. BTW the engine seems to run at the correct temps.
My girlfriend installed the new BJ's offroad fuel filler lines. They look and fit great!
Please come on over to http://fsjnetwork.com/forum and have a look.
Comment
-
-
I noticed that a fuel return hose (I think from the charcoal canister - someone confirm this) was dangerously close to the catalytic converter. It showed signs of getting too hot
So I changed the direction of the little tab on the NP229 transfer case which moved the fuel line 1.5" further from the cat. Also replaced the 5/16th" fuel line and wrapped it aircraft speed tape. I figure that speed tape may help reflect the heat from the cat. I will probably get the exhaust shop to put a heat sheild around the cat later on.
pics
Please come on over to http://fsjnetwork.com/forum and have a look.
Comment
-
-
yeah but i feal bad man cuse i thought it just may need a rebuild not all the gasgets and all that but i called the shop that did it and ringed them out and they told me to never bring my trucks over again lol so i told them cool cuse i wasent planing on it any way but glad hes treating you right he all ways did for me one of the best trucks i ever owned1977 Mustang 2 limited edtion T-Tops (Orange Juice)
Comment
-
-
Took a look at the passenger side window to see why it's not working. The motor works fine, but the gear track thingy is broken as seen below.
Any ideas on replacing this? I found it at http://www.teamgrandwagoneer.com/par...ems/index.html but I am unable to remove that screw which holds the track on. None of my torx or allens fit it...
Please come on over to http://fsjnetwork.com/forum and have a look.
Comment
-
-
looks like this style:
1979 Chero S "Sundog" 1979 Chero S "Hammer"
1968 327 J3000 1978 J10SWB
The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.
Hunter S. Thompson .
Comment
-
-
Think the dremel tool and a flat head screw driver would do the trick if you don't wanna buy new sockets. Looks real good man.91 Grand Wagoneer
AMC 360 / Torqueflight 727 / NPM 229
Dana 44 front and rear
6" Rustys Offroad suspension lift
BJ's quick disconnects
BJ's PreRunner front bumper with winch plate
fenders trimmed
35x12.50x15's Maxxis Bighorn mudders
Rhino grill
http://www.tnjeeps.com/
Comment
-
Comment