Thank you so much, I shall do that then. You just hopefully saved me a lot of hassle, bro. Appreciated!!
Tech-Installing rear discs on early Jeep Full Float D60
Collapse
X
-
1979 Chero S "Sundog" 1979 Chero S "Hammer"
1968 327 J3000 1978 J10SWB
The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.
Hunter S. Thompson .
-
-
Cool, I sent him what you said (since it'll be fresh in his mind) and a pic of how it sits, and will wait and see how it turns out. Thanks man.1979 Chero S "Sundog" 1979 Chero S "Hammer"
1968 327 J3000 1978 J10SWB
The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.
Hunter S. Thompson .
Comment
-
-
I'm not thrilled about touching that flange, but at this point gotta gitterdun. If you could snap a pic of how yours turned out, that'd be awesome. Thanks for posting up.1979 Chero S "Sundog" 1979 Chero S "Hammer"
1968 327 J3000 1978 J10SWB
The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.
Hunter S. Thompson .
Comment
-
-
I will get a picture in the next day or two. I would get a 1/2'' center punch and use you bracket as a template to drill the holes. If you do not re drill you will not get the caliper pin out unless it not in a 71-73 J truck. Then the spring is back far enough to get the pins in. When you call tell him my name, Billy Murdock with the Jeep truck just to help him remember. They are very nice, and easy to work with.
Comment
-
-
Thanks! I'll try that...I have them clocked way back now which isn't optimal but isn't bad. I have stock springs in stock location. Hope it works out, fingers crossed.1979 Chero S "Sundog" 1979 Chero S "Hammer"
1968 327 J3000 1978 J10SWB
The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.
Hunter S. Thompson .
Comment
-
-
hey man i feel your pain, i just spent all day installing rear discs on my camaro. my kit uses ford thunderbird calipers (ford parts, i should have know it wasn't going to go well). well the way the kit works the bleeder screw points down. so to make it possible to bleed they put a bleeder screw in the banjo bolt. and no supprise i couldn't get them to bleed. so after spending way to mutch time messing with it i decided to switch everything around, right side on the left and left on the right. this way the bleeder screw was pointing up. i could do this because i have a four link and not the stagerd shocks. shure enough problem solved. anyway i guess we get to learn that nothing is a "bolt on" kit. so sorry for the hyjack/rant, hope you get everything working right.'73 J4000 4 door longbed http://www.ifsja.org/forums/vb/showthread.php?t=120147
'85 Wagoneer
YES i WILL be in ouray in 2013!
Comment
-
-
Nope, trust me, I understand. Staying calm, trying to figure it out, then asking for help never hurts if you can do it.1979 Chero S "Sundog" 1979 Chero S "Hammer"
1968 327 J3000 1978 J10SWB
The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.
Hunter S. Thompson .
Comment
-
-
Cool, I hope this is good news on the Dodge brackets.Flint
Ran when parked.
http://jubileejeeps.org/quadratrac
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s with a few Evil Twin & TT's Fabworks mods
76 401 Wag, 77 401 Wag, 77 401 J20
http://eviltwinfab.com http://www.ttsfabworks.com
Comment
-
-
Vendor and I are working this out right now.1979 Chero S "Sundog" 1979 Chero S "Hammer"
1968 327 J3000 1978 J10SWB
The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.
Hunter S. Thompson .
Comment
-
-
Awesome! I'm running 16.5 so maybe I'll get lucky and have them higher. Thank you for the pics! He's checking with his guy, but looks like I'll be getting the right seals and the dodge style brackets sent out to me...and this thread can end with a happy ending.1979 Chero S "Sundog" 1979 Chero S "Hammer"
1968 327 J3000 1978 J10SWB
The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.
Hunter S. Thompson .
Comment
-
-
Originally posted by Gambler68Awesome! I'm running 16.5 so maybe I'll get lucky and have them higher. Thank you for the pics! He's checking with his guy, but looks like I'll be getting the right seals and the dodge style brackets sent out to me...and this thread can end with a happy ending.Flint
Ran when parked.
http://jubileejeeps.org/quadratrac
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s with a few Evil Twin & TT's Fabworks mods
76 401 Wag, 77 401 Wag, 77 401 J20
http://eviltwinfab.com http://www.ttsfabworks.com
Comment
-
Comment