Tweet
How to remove the wire plug on side view electric mirror . It is a round female pin connector plug on the mirror TY
-
1982 cherokee nt. 454. nv4500 .205. dana 60 f+r. twin stick.hydroboost.hydrolic clutch.rock ram.traction bar.warn 12000 winch.4 wheel disc.flip kit.soa.high steer.cross over steer.4.56 detroit locker.35 spline rear alloy axles. 37s .1990 grand wagoneer aka trusty rusty -
You will need special pin removal tool, snap on tool trucks etc. will have them or go online and you can find them, used for pin removal from back side of connector. -
Go to Amazon and type it "terminal removal tool"
You can get the same 36 piece set I got for like $10 and free 2 day shipping w/prime.
Or you can go the tool truck route but be prepared.
Last time I remember looking for a set on a Matco truck it was right at $100 for a much smaller set. I didn't like the price or the way they all had their own handle like a small screw driver. The molded case is nice but it takes up a lot of real estate in the tool box. Just something to think about.89' GW 6BT CumminsComment
-
TY all .I have pin removal tool but not that small1982 cherokee nt. 454. nv4500 .205. dana 60 f+r. twin stick.hydroboost.hydrolic clutch.rock ram.traction bar.warn 12000 winch.4 wheel disc.flip kit.soa.high steer.cross over steer.4.56 detroit locker.35 spline rear alloy axles. 37s .1990 grand wagoneer aka trusty rustyComment
Comment