Markus is happy because his engine gets some of the leftovers
AMC401 Build for itselliot
Collapse
X
-
Originally posted by SC/397I ordered Speed-Pro/TRW L2380NF30 for this one because they were less expensive than Wiseco when you add the cost of the rings in.
Here are the Wiseco pistons but they require expensive rings.
http://www.campbellenterprises.com/a...ons-wiseco.php
Comment
-
-
Originally posted by NikkormatWhat do you expect the power output of this motor to be? Will it clear 400hp? 6250 RPM rev limiter capable? If it's not what would you change to make it rev to 6250? I'm looking to embarrass some more imports in the new wagon.
To clear 400 hp you need a bigger cam and better intake and bigger carb.
Page 3 shows dyno results for a 9.5 compression ratio 401 with a Isky 280HL cam, Torker intake and 750 Holley which made 380hp at 5200 rpm.
The first one up is #60. 67RogueXCode: 343 block, 360 crank. Bore: 4.125 Stroke: 3.44 CID: 367.78 Heads: 1986 360 Dog Leg. C.R. 9.47:1 compression ratio Intake: Eddy Performer
If you want your peak horsepower at 6250 just go with a bigger cam, Torker intake and bigger carb.The Squeaky Wheel gets replaced in my world
Comment
-
-
Originally posted by highspdlife0224Hey! I think I recognize that motor!
Keep looking for those parts!................If the PM's are full,...try e mail!
[email protected]
616 four 03 44 0 five
'78 J-20 401 Q/T not quite stock anymore....Frame off Resto Mod..Super Cab nearing completion. SOMEDAY
"90 GW 360/727/229/3:31s 2" lift (SOLD in 2015)
'78 CJ7 Built from Scratch over a 7 year span.
Comment
-
-
Originally posted by SC/397With the relatively small cam and the Performer intake manifold my guess would be about 350hp at 5000 rpm. It should have plenty of low end grunt thought, which is the goal with this one.
To clear 400 hp you need a bigger cam and better intake and bigger carb.
Page 3 shows dyno results for a 9.5 compression ratio 401 with a Isky 280HL cam, Torker intake and 750 Holley which made 380hp at 5200 rpm.
The first one up is #60. 67RogueXCode: 343 block, 360 crank. Bore: 4.125 Stroke: 3.44 CID: 367.78 Heads: 1986 360 Dog Leg. C.R. 9.47:1 compression ratio Intake: Eddy Performer
If you want your peak horsepower at 6250 just go with a bigger cam, Torker intake and bigger carb.If the PM's are full,...try e mail!
[email protected]
616 four 03 44 0 five
'78 J-20 401 Q/T not quite stock anymore....Frame off Resto Mod..Super Cab nearing completion. SOMEDAY
"90 GW 360/727/229/3:31s 2" lift (SOLD in 2015)
'78 CJ7 Built from Scratch over a 7 year span.
Comment
-
-
Looks so nice!!!Markus!
Member, FSJ Prissy Restoration Association
Note: Everyone has a plan until they get punched in the face. - Mike Tyson
Cherokee Chief Laredo, 360 cui, selec trac, black, 12/1982
Picture story:
https://picasaweb.google.com/1019823...eat=directlink
Comment
-
-
any updates?Chuck McTruck 71 J4000
(Chuck McTruck Build Thread)
(8.1L swap questions - PerformanceTrucks.net Forums)
79 Cherokee Chief (SOLD, goodbye old buddy)
(Cherokee Build Thread)
11 Nissan Pathfinder Silver Edition 4x4
09 Mazdaspeed3 Grand Touring
00 Baby Cherokee
Comment
-
-
Hi All, Has anyone managed to successfully install a GM 4L80E Transmission into a Pre 1980 Cherokee and connect it to the BW1339 Quadra Trac? On the assumption (I'm pretty sure it will be) that my Cherokee has the BW1339 Quadra Trac Transfer Case my plan is to fit a later Overdrive Transmission using one of the BJ's
Yep, I finished up the 401 for my Mate in England last night so now, I can move on to this one... Here is the never ending list that takes up all of my spare time. Wish I could work on something for ME one of these days.
8: 70 390: Pile of parts. Build to order. At the Machine Shop
56. 426Stroker: Crank is done. Build to order
62: Rick's429. Parts in house, ready for machining
63. Ambo383stroker: Ready to clean and assemble
71. javtwotone 383 stroker: Back in que..
73. CastPiston401crossram: Need to install intake
74. RR290: bone stock 290 for ’66 Rogue Convert. Needs disassembled
75. BStuts390: Ready to clean and assemble
76. BMathis401: On hold.
77. itselliot401: Ready to clean and assemble
78. cma360: Ready to clean and assemble
79. MS304: Tear down, inspect, fix, rebuild.
80. DBX11360: 360 for a J10. At the Machine Shop
81. MM390: Warmed over 390 for a Javelin. At the Machine Shop
82. RR360: Re-ring, new bearings, timing set, valve job
??. 383 Stroker
??. 401 Forged Pistons
??. 70 390 +.040 Forged Piston
??. 70 390 cast pistonLast edited by SC/397; 02-06-2017, 09:06 AM.The Squeaky Wheel gets replaced in my world
Comment
-
-
Comment
-
-
so nice job!Markus!
Member, FSJ Prissy Restoration Association
Note: Everyone has a plan until they get punched in the face. - Mike Tyson
Cherokee Chief Laredo, 360 cui, selec trac, black, 12/1982
Picture story:
https://picasaweb.google.com/1019823...eat=directlink
Comment
-
Comment