Originally Posted by babywag
@ minimum should monitor data to try and make very certain it isn't too lean.
too lean and you risk chewing up cylinder(s) and/or piston(s).
what is your plan on a .bin?
Will do. I downloaded ProTuner this weekend and am watching videos on how to use it.
.bin: I have one computer from a stock 95 350 and also bought this setup:
He had it on his 440 which is very similar to my build: Similar cam, similar compression, headers, timing control, etc. I know I will need to tune but his .bin should be in the ball park for me and close enough to break in the cam? I am using his injector pod now (28psi, I verified it this weekend) and computer. I hope to get into that .bin this week and see what's in there. ProTuner is all new ground for me so I have a steep learning curve. Luckily there is tons of info out there, I just need to spend the time to learn it.
79 Cherokee Chief (passed CA smog check Sept 2020)
(Cherokee Build Thread)
11 Nissan Pathfinder Silver Edition 4x4
09 Mazdaspeed3 Grand Touring