Sticky post idea for the Classified areas...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • JeepBountyHunter
    GrimJeeperReaper
    • Jul 08, 2002
    • 10250

    Sticky post idea for the Classified areas...

    Just a thought. But we should all try and contribute to a thread that lets people read about what to save and salvage if a Jeep must head to the junk yard and can't be sold whole..

    It would be listing, possibly with pic's..likely reduced for size...
    The idea would be everything from large parts down to bolts, nuts and screws would be saved, and stored in a manner that they could be identified when it was time to sell..such as in boxes, baggies..etc.


    Examples..
    1. Carburator and it's parts.
    2. CTO switches.
    3. Engine bolts.
    4. Engine accessory brackets.
    5. Wiring parts/components
    6. Trim screws
    7. Trim
    8. Body panels
    9. Emblems
    10. Seat covers

    And the listing can be cataloged to reflect sections of the Jeep..i.e. Interior, Exterior, Drivetrain...

    Just a thought, because sometimes someone new posts up regarding parting out a Jeep before it heads to the crusher..etc..
    1992 Cherokee XJ Laredo
  • Tad
    • Nov 30, 2001
    • 17618

    #2
    I like it.
    For now I'll sticky it here and you're in charge of making some type catagorical sense out of what folks post.

    If it works well, then we'll figure out what/where and how to present it.
    2000 Infinity QX4, 3.3L, MPFI, 4 speed auto, 2 speed Nissan tcase, Unibody, IFS front, 4 link rear solid axle with 255-70/16s

    IFSJA WMS PROJECT
    EARLY WAG LIFT SEARCH

    ...Pay no attention to these heathen barbarians with their cutting torches and 8" lift kits!...
    Self Inflicted Flesh Wound

    Comment

    • JeepBountyHunter
      GrimJeeperReaper
      • Jul 08, 2002
      • 10250

      #3
      LOL, okay thanks Tad.
      1992 Cherokee XJ Laredo

      Comment

      • SnowShoe
        350 Buick
        • Feb 24, 2008
        • 1296

        #4
        Thanks Guys....EXCELLENT idea...

        Arron...this might cut into your biz....LOL

        Comment

        • backroadin'
          350 Buick
          • Aug 11, 2004
          • 1134

          #5
          Armrests, headlight buckets for the round lights, older marker lights, ashtrays, seatbelts, glove box handles if they're still there, maybe an ignition module......
          I see alot of folks looking for those things.
          I think this is a cool idea and would be a neat resource.
          I stripped a j10 once and hardly sold the stuff I thought would sell - it was mainly the little stuff folks wanted.
          1973 Wagoneer, 4.6L Jeep inline 6 stroker, t176/d300, offy dualport w/ quadrajet, pertronix, flowmaster

          "Roads? Where we're going we don't need roads." -- Doc Brown

          "When this baby reaches 88 miles per hour, you're gonna to see some serious sht!"

          Comment

          • Chuck Brown
            327 Rambler
            • Feb 17, 2008
            • 542

            #6
            My own personal vote would be for W/T fender flares and tailgate window motors.

            Chuck Brown
            Life may be hard, but it sure as hell beats the alternative.
            Works in progress:
            1977 Cherokee Chief; 401/Auto/6" BJ's Lift/Cliffhanger/Stripped out Interior
            1964 J200; 360, .030 over, Edelbrock Intake and Carb, 6" lift

            Comment

            • Geeeep
              304 AMC
              • Nov 02, 2002
              • 2203

              #7
              Smog equipment in good shape.
              Dave Pitts, located directly over the center of the earth!

              GW - 87 GW 360/4bbl/727/208 Vinyl floor, manual windows, no woodgrain
              Find someone to haul your Jeep here: YT Hauling Schedule

              Comment

              • Casey
                • Oct 08, 2003
                • 6151

                #8
                Battery trays
                J truck tail lenses
                J-20 shackles/steering boxes
                J truck driveshafts (they're great for cutting down to fit after wag/Cherokee SOA)
                1994 YJ
                1986 Comanche
                '57 FC-150

                Carolina Full Size Jeep Club
                www.cfsjc.com


                www.patriotguard.org

                Originally posted by Jeepstress
                "Go forth and be a tool".
                Originally posted by 78 Wagoneer
                This year for ECI I got a Jeep. Pretty important upgrade.

                Comment

                • vintagetrks
                  304 AMC
                  • May 01, 2009
                  • 2027

                  #9
                  Great Idea

                  What a great Idea. It would really be great to be able to buy original parts at a good price from a fellow jeeper.
                  New Full Size Jeep Nut

                  I'm just a washed up old has been, Army guy.
                  My opinions are outdated... After all, what have I done lately? I used to be somebody "A SOLDIER!"

                  04 Jeep Wrangler "Lil Ninja" 32's 2in lift swaybar disconnects
                  90 Grand Wagoneer "Big Mama"

                  Comment

                  Working...
                  X