Sniper EFI WOT timing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • jmac197
    230 Tornado
    • Apr 05, 2019
    • 6

    Sniper EFI WOT timing

    Subject pretty much says it.



    I just finished installing my Sniper and was going thru the initial set up. What are you guys using for your WOT timing setting


    Thanks
  • Carbinekid
    230 Tornado
    • May 24, 2020
    • 15

    #2
    I’m at the same step what did you end up going with?

    Comment

    • pickledtoast
      232 I6
      • Feb 13, 2018
      • 59

      #3
      Touchpad wizard I initially went with 15 idle, 36 cruise, 32 WOT. But the wizard created timing map is scary. It looks like this with your three entered values:



      Use the free sniper efi software and a SD card to create/upload a good ignition map. I also smoothed out the target AFR table, etc.
      This is a good video:
      Timing control is one of the biggest benefits of EFI! Having the ability to have a specific amount of timing advance in each individual cell means your car w...

      Comment

      • Carbinekid
        230 Tornado
        • May 24, 2020
        • 15

        #4
        Thank you for the initial baseline.

        Comment

        • pickledtoast
          232 I6
          • Feb 13, 2018
          • 59

          #5
          The initial 15 was updated to 22 to get more vacuum at idle. I'd post a screenshot but that's difficult on this site.

          The current ignition map, following the above video, has ignition timing at idle around 20. Works well after adjusting my cam timing.

          Comment

          Working...
          X