Tweet
Looking to find a place that sells these new or someone that has them used - any help is appreciated - I need the long one below the drivers window - I have 85 GW
-
-
I found it easier to just weld some square tubing between what was left of my inner rockers to the floor bracing and the floors.81 wagoneer -
At this point I would like to just get a used floor support - cut off a parts carComment
-
Any one have a front floor support they are willing to part with?Comment
-
Did you contact a jeep parts yard or pick and pull !?
You could contact Watson's and sons , the have enough parts jeeps ,so probably they can remove one and ship it your way.
I haven't bought parts from them ,but have had contact about a truck cab roof and they are willing to cut it and ship it.
So that could be a option for your situation!Jeep "because mother nature hates flat roads to"
http://www.ifsja.org/forums/vb/showthread.php?t=180974
99' Dodge ram 2500 4x4 crew cab 5.9 Cummins ,backup work truck for now
73' Jeep J4000 (named Heep or Desert Dragon) amc 360 V8 converted to LPG with T15/D20 (was my daily work truck for thirteen years and is getting major overhaul at the moment!)
80' Jeep cj5 350 V8 Chevy/sm420/D300 project
70/71 Jeep J4000 parts truck with Buick 350
Former vehicles:
85' Volkswagen caddy mk1 1.6 diesel.
83 Toyota land cruiser BJ42 3.4 diesel.Comment
-
Check this out. I used this on my '67 years ago and cut them to fit where I needed them. They are very similar to the supports used when the bodies were built.
Jim C
'67 J3000 Dually
'86 J20
'79 CJ5(in pieces)
'86 CJ7 Doesn't need anything(so why do I have it?)
Correction- it just needed a water pump!Comment
-
Floor support - found it
I found one at century junkyard in Philly - thx for the help - they cut it out for meComment
Comment