Originally Posted by Hippie Metal
I was just wondering the same thing to myself. I am running a Ford T-18/Twin stick 205 behind a sound running 360 in a 1984 GW
Hippie, you are running a near identical trans/t-case combo as me. I'd buy some bigger axles with something between 3.73's or 4.10's in them already if I were you. 4.10 with 36's is more than enough gear for me with the deep Ford trans gears. You are already geared lower than a stock waggy as it is. If you are like me, I only street drive 2nd-4th and If I recall correctly, 2nd in the Ford T-18 is deeper than the stock 727's 1st gear.
Military guys- Check out www.MilitaryJeepers.com
'89 GW deceased
Ford 4spd swap Np435/205
Lifted/stretched on 36's/4.10 thick gears/spooled rear
'86 CJ-7 Renegade
, Restored, original steel.
new Built TBI 258/Np435/D300 twin-sticks/Waggy D44's
37" Super Swampers and lots of goodies!