International Full Size Jeep Association
Home Forums Reader's Rigs Tech Library Trail Stories FSJ-List
International Full Size Jeep Association  

Go Back   International Full Size Jeep Association > Tire Kickin' > General FSJ Tech

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-18-2011, 06:51 PM
scram-man's Avatar
scram-man scram-man is offline
Member
 
Join Date: Nov 18, 2009
Location: Plano, TX
Posts: 127
Tailgate window question

Ok, who can figure this one out.
My tailgate window works great from the dash switch, up and down without problem.

The key switch in the tailgate is new, the wiring to the key switch is new and has been done per the schematic for the 79yr.

When I use the key the motor is slow (up or down) and trips the circuit breaker. I've even gone to a 40amp breaker instead of a 30amp.

What gives?!? Everyting seems to be the way it's supposed to be. When I'm inside the tailgate, with the window glass off the arms, the key switch moves it just fine. Put the glass on and close the gate and it's like the motor can't push it, it trips the breaker. Use the das switch and up she goes!

Any ideas??
__________________
79 Cherokee, 5.3Vortec/4L60E/241TC, daily driver, not quite finished
Reply With Quote
  #2  
Old 05-18-2011, 08:06 PM
serehill's Avatar
serehill serehill is offline
Gone,Never Forgotten.
 
Join Date: Nov 22, 2009
Location: Mesquite Texas
Posts: 8,622
well

I didn't do the factory restore like your doing but there are several serious design flaws in the system one is the wiring & switches are not even close to big enough to carry 40 amps putting a 60 amp breaker on it won't work. The switches on the dash & key switch have tiny wires trying to carry all that curent. Want to see something funny? Take a volt meter & connect it to the motor wires & watch it with the tailgate closing go to less than 5 volts. Some of the wire in the circuit is low quality copper 14 guage & some of it is 16 guage. OH 14 Guage 20 amps barely & 16 guage 10 amps. I ran # 10 guage wire (30 amp) from the fuse to 2 realays one for up & one for down & the hooked the switches up to simply control the relays not carry the current. It works like a charm. Also making sure the window track is aligned with the body track when the window goes up & the tailgate is closed. You can adjust the tailgate to align. Because of the wiring though these things are famous for failure. Building a relay system to control them & enlarging the wiring to 30 amps work incredibly well. Do the volt metter test after you checkalignment & you'll see what I mean.
Good luck.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Another...Tailgate wiring question 70Wangoneer General FSJ Tech 0 02-16-2009 11:14 PM
Rear Window Question James 90GW General FSJ Tech 5 02-25-2004 10:31 AM
*ANOTHER* Tailgate Electric Window Question Jbreak General FSJ Tech 2 12-19-2002 09:11 AM
tailgate weather strip, rear wiper, "keep window up while driving" GED General FSJ Tech 3 07-28-2002 03:29 PM
Rear Window a Sticken JERRY88GW Body 0 08-02-2000 03:52 AM


All times are GMT -6. The time now is 12:48 AM.


Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
corner corner