International Full Size Jeep Association
Home Forums Reader's Rigs Tech Library Trail Stories FSJ-List
International Full Size Jeep Association  

Go Back   International Full Size Jeep Association > Tire Kickin' > General FSJ Discussion

Reply
 
Thread Tools Search this Thread Display Modes
  #601  
Old 11-03-2022, 10:19 PM
cu4whln's Avatar
cu4whln cu4whln is offline
304 AMC
 
Join Date: May 16, 2008
Location: Canton, Mi USA !
Posts: 1,652
In Today's News . . .


Seats tracks are now painted.

[IMG]http://[/IMG]

[IMG]http://[/IMG]

Seats belt install ...

These are aftermarket units from ZM Jeep.
They are a bit different than the stock units, but safe.

[IMG]http://[/IMG]

Ready for the seats ...

[IMG]http://[/IMG]

Seats now installed with longer grade 8 hardware.

[IMG]http://[/IMG]

[IMG]http://[/IMG]

Hmm, what to do now ??

__________________
It's not yours 'til ya bleed on it . . .

1977 "401" 'Da Chief
1979 Chero: "Madness" [Sold]
1985 CJ : Renegade -locked and loaded
2005 Unlimited Rubicon - Built
2001 XJ : Driver - 2016 JK 2 door

'Da Chief here: http://www.ifsja.org/forums/vb/showt...ighlight=chief

Round 2- LT Swap: 'Da Chief:
http://www.ifsja.org/forums/vb/showthread.php?t=188457

"Madness" build here:
http://www.ifsja.org/forums/vb/showthread.php?t=89280
Reply With Quote
  #602  
Old 11-03-2022, 10:38 PM
cu4whln's Avatar
cu4whln cu4whln is offline
304 AMC
 
Join Date: May 16, 2008
Location: Canton, Mi USA !
Posts: 1,652
Next Up . . .

Well, have a lot of dash clean up to do yet.

Wiring, routing cleanup, glove box install, dash vent cables, cluster.

Plenty to do yet ...

BUT - Who needs a cluster to take a test drive??

NOT ME !

So, grab the wife for our maiden voyage.
After all, she has been very understanding while I have been working on this thing.

So off we go!



8 miles later, loop back to the house to pick up the registration and insurance papers... Ooops.

Wife stays at the house now just in case...

More miles, no major issues.

Basic report - All seems well.

Jeep drives well now.

The biggest observations:

The Jeep is 90% quieter now.
I attribute that to the sound deadener and AT tires vs MT tires. HUGE difference. Wow, we can actually talk while driving now.

Wind noise... Nope.
Well, driver window fell off the track or something.
Will have to pull the door back apart.
So I had the driver window was open the whole drive.
Thats OK, as it strangely warm here in Michigan right now.

Rattles seem better now - Maybe I can't hear them ?

Engine power is great as expected from last years drives.

Engine is very quiet, even with a straight through Borla muffler.
However, it has a nice deep, throaty sound with power.

It was a nice break to actually take it for a spin.

Pulled up in front of the house for a couple of pics before putting it back in the garage.

[IMG]http://[/IMG]

[IMG]http://[/IMG]

Now I have to resist the urge to go drive it and get back to the grind.

Finish up the open items - Details always take longer than expected.
__________________
It's not yours 'til ya bleed on it . . .

1977 "401" 'Da Chief
1979 Chero: "Madness" [Sold]
1985 CJ : Renegade -locked and loaded
2005 Unlimited Rubicon - Built
2001 XJ : Driver - 2016 JK 2 door

'Da Chief here: http://www.ifsja.org/forums/vb/showt...ighlight=chief

Round 2- LT Swap: 'Da Chief:
http://www.ifsja.org/forums/vb/showthread.php?t=188457

"Madness" build here:
http://www.ifsja.org/forums/vb/showthread.php?t=89280
Reply With Quote
  #603  
Old 11-03-2022, 11:02 PM
SJTD SJTD is offline
304 AMC
 
Join Date: Apr 26, 2012
Location: Lompoc and Sunland, CA
Posts: 1,830
Wow. Looks so good.

Do those seat belt rollers or whatever they're called need to be enclosed? Are there any exposed moving parts? They look way better than the huge stock boxes.
__________________
Sic friatur crustulum

'84 GW with Nissan SD33T, early Chev NV4500, 300, narrowed Ford reverse 44, narrowed Ford 60, SOA/reversed shackle in fornt, lowered mount/flipped shackle in rear.
Reply With Quote
  #604  
Old 11-04-2022, 06:38 AM
cu4whln's Avatar
cu4whln cu4whln is offline
304 AMC
 
Join Date: May 16, 2008
Location: Canton, Mi USA !
Posts: 1,652
Quote:
Originally Posted by SJTD
Wow. Looks so good.

Do those seat belt rollers or whatever they're called need to be enclosed? Are there any exposed moving parts? They look way better than the huge stock boxes.

Thx!

Seat Belts:

They have covers on there, just not real pretty.
I agree they are less intrusive size wise.

So, they do have a protective cover.
These belts are not "position sensitive" like a "normal" seat belt.

They work based on how fast the belt reels out.
So, you have to pull the belt out slowly or it locks on you.
Not a problem once you figure it out.

Note: I attached the inboard belt to the seat like modern set ups.
Thus, not large/long belt reaching behind the seats on the tunnel.

I am OK with them.

I have no plans for a back seat as we plan to road trip with a cooler, camping stuff, and luggage.
__________________
It's not yours 'til ya bleed on it . . .

1977 "401" 'Da Chief
1979 Chero: "Madness" [Sold]
1985 CJ : Renegade -locked and loaded
2005 Unlimited Rubicon - Built
2001 XJ : Driver - 2016 JK 2 door

'Da Chief here: http://www.ifsja.org/forums/vb/showt...ighlight=chief

Round 2- LT Swap: 'Da Chief:
http://www.ifsja.org/forums/vb/showthread.php?t=188457

"Madness" build here:
http://www.ifsja.org/forums/vb/showthread.php?t=89280
Reply With Quote
  #605  
Old 11-04-2022, 09:37 PM
cu4whln's Avatar
cu4whln cu4whln is offline
304 AMC
 
Join Date: May 16, 2008
Location: Canton, Mi USA !
Posts: 1,652
In Today's News . . .

Todays "Fun"

Keep plugging away at it.

Well, found out why my window wasn't working. Ooops.

The track guide broke off with a piece of the rusted channel.



[IMG]http://[/IMG]

Guess it's time to find another window or try the repair parts.

Next up: Center caps and lug nuts.

I picked up some stainless hardware to attach the center caps.
There were a variety of fasteners before. I wanted them all the same.

So, bolts and star lock washers it is.

Do NOT forget to use locktight. You do not want these to come loose.

Installed a new set of lug nuts from BJs Off Road.

[IMG]http://[/IMG]

Now for the red neck locktight...

I have learned this from aircraft and race cars.... "Goop" holds up very well to vibration.
If the bolts try to come loose, they will not turn.
I dabbed some on after installing the bolts the right way.
Maybe overkill, but center caps are hard to come by.

[IMG]http://[/IMG]

So, removed all the wheels and got it done.

Then? Another 20 mile drive... with the driver window wedged in the up position.

74 outside and got caught in a traffic jam... no problem ! Temp at 200 F

Man, the vent window whistles like crazy!

Engine is very happy ...

[IMG]http://[/IMG]

That is all for today . . .
__________________
It's not yours 'til ya bleed on it . . .

1977 "401" 'Da Chief
1979 Chero: "Madness" [Sold]
1985 CJ : Renegade -locked and loaded
2005 Unlimited Rubicon - Built
2001 XJ : Driver - 2016 JK 2 door

'Da Chief here: http://www.ifsja.org/forums/vb/showt...ighlight=chief

Round 2- LT Swap: 'Da Chief:
http://www.ifsja.org/forums/vb/showthread.php?t=188457

"Madness" build here:
http://www.ifsja.org/forums/vb/showthread.php?t=89280
Reply With Quote
  #606  
Old 11-06-2022, 08:25 PM
rang-a-stang's Avatar
rang-a-stang rang-a-stang is offline
Administrator
 
Join Date: Oct 31, 2016
Location: Camarillo, CA/Boise, ID
Posts: 4,881
BURNOUT VIDEO!!!!!! (or doughnuts )

I'm just kidding of course. After all the time and effort (and money in tire) Burn out videos can be expensive.

When you first started down the seat path, I thought they were going to look bulky and out of place. Seeing them in there now, against your dash and new carpet they look really natural there.

The color looks stunning every time I see it. It Doesn't get old at all... Amazing.
__________________
79 Cherokee Chief (SOLD, goodbye old buddy)
(Cherokee Build Thread)
11 Nissan Pathfinder Silver Edition 4x4
09 Mazdaspeed3 Grand Touring
00 Baby Cherokee
Reply With Quote
  #607  
Old 11-07-2022, 07:32 AM
cu4whln's Avatar
cu4whln cu4whln is offline
304 AMC
 
Join Date: May 16, 2008
Location: Canton, Mi USA !
Posts: 1,652
Quote:
Originally Posted by rang-a-stang
BURNOUT VIDEO!!!!!! (or doughnuts )

I'm just kidding of course. After all the time and effort (and money in tire) Burn out videos can be expensive.

When you first started down the seat path, I thought they were going to look bulky and out of place. Seeing them in there now, against your dash and new carpet they look really natural there.

The color looks stunning every time I see it. It Doesn't get old at all... Amazing.

Thanks Rang!

The seats were a lot of work.. but very comfortable.

I also had some concerns on seat size, they are wide !

The biggest issue was the overall height of the seat and how you feel sitting in it.
I lowered the rear of the seat track to right on the carpet to get them as LOW as possible. ( Fronts of seat is higher for comfort angle )

These seats have a lot more foam/structure under and in the seat bottoms than the originals.

Now, back to work on all the dash details . . .

__________________
It's not yours 'til ya bleed on it . . .

1977 "401" 'Da Chief
1979 Chero: "Madness" [Sold]
1985 CJ : Renegade -locked and loaded
2005 Unlimited Rubicon - Built
2001 XJ : Driver - 2016 JK 2 door

'Da Chief here: http://www.ifsja.org/forums/vb/showt...ighlight=chief

Round 2- LT Swap: 'Da Chief:
http://www.ifsja.org/forums/vb/showthread.php?t=188457

"Madness" build here:
http://www.ifsja.org/forums/vb/showthread.php?t=89280
Reply With Quote
  #608  
Old 11-09-2022, 07:58 PM
letank's Avatar
letank letank is offline
AMC 4 OH! 1
 
Join Date: Jun 03, 2002
Location: San Francisco
Posts: 4,089
very nice seats, and even a better idea about the locktite / thread locker with the goo for the hubs bolts, what do you have on the street side for the hub bolts?
__________________
Michel
74 wag, 349Kmiles on original ticker/trany, except for the rust. Will it make it to the next get together without a rebuilt? Status: needs a new body.
85 Gwag, 229 Kmiles. $250 FSJ test lab since 02, that refuses to give up but still leaks.

See Ouray 2013, Engine bits and Fuel and brake lines, and Body work
Reply With Quote
  #609  
Old 11-09-2022, 11:33 PM
cu4whln's Avatar
cu4whln cu4whln is offline
304 AMC
 
Join Date: May 16, 2008
Location: Canton, Mi USA !
Posts: 1,652
Quote:
Originally Posted by letank
very nice seats, and even a better idea about the locktite / thread locker with the goo for the hubs bolts, what do you have on the street side for the hub bolts?

Lug nuts?

I bought a new set from BJs Off Road.

[IMG]http://[/IMG]
__________________
It's not yours 'til ya bleed on it . . .

1977 "401" 'Da Chief
1979 Chero: "Madness" [Sold]
1985 CJ : Renegade -locked and loaded
2005 Unlimited Rubicon - Built
2001 XJ : Driver - 2016 JK 2 door

'Da Chief here: http://www.ifsja.org/forums/vb/showt...ighlight=chief

Round 2- LT Swap: 'Da Chief:
http://www.ifsja.org/forums/vb/showthread.php?t=188457

"Madness" build here:
http://www.ifsja.org/forums/vb/showthread.php?t=89280

Last edited by cu4whln : 11-09-2022 at 11:53 PM.
Reply With Quote
  #610  
Old 11-09-2022, 11:52 PM
cu4whln's Avatar
cu4whln cu4whln is offline
304 AMC
 
Join Date: May 16, 2008
Location: Canton, Mi USA !
Posts: 1,652
In Today's News . . .

Cleaning up dash stuff so I can install the cluster...

But first, need to hook up the "Squid Launchers"!



The chrome is less than in good shape on these parts. See the black spots ? Missing chrome.

I have looked a bunch of them, none of them seem to have a decent finish any more?

So I got out my chrome plastic pen, and went to work.

Not a great pic, but the part on the left has not been done yet.
The right has, but it doesn't show clearly . . .

[IMG]http://[/IMG]

This pic shows the surface a bit better...
You have to put a lot of the material on there, then let it dry for a couple of days. Do NOT touch it if possible...
The finish is in no way perfect, but MUCH improved!

Looking closely, you can actually see my reflection.

[IMG]http://[/IMG]

Then I reinstalled the cables into the dash and routed them to the cowl vents.
Do NOT forget to run the cable through the plastic vent cover before attaching ( ask me how I know )
The cables are very stiff and hard to guide into the cowl door ( hard to see )
Hooking up the cable was a total pita btw.
Not sure how they did this at the factory.

Anyway, they are in.

After that, I tackled the parking brake reinstall.

Had to remember what went where since its been a year since taking it apart! Thank god I bagged all the hardware..
This also was not a lot of fun... I hate working under the dash...

Then hooking up the park brake cables was a challenge.
Got that on, then started to adjust the mech to work properly.

Yea, do not tighten the adjusting nut too much!

This led to a couple of short drives to test it.
At least that was fun !

__________________
It's not yours 'til ya bleed on it . . .

1977 "401" 'Da Chief
1979 Chero: "Madness" [Sold]
1985 CJ : Renegade -locked and loaded
2005 Unlimited Rubicon - Built
2001 XJ : Driver - 2016 JK 2 door

'Da Chief here: http://www.ifsja.org/forums/vb/showt...ighlight=chief

Round 2- LT Swap: 'Da Chief:
http://www.ifsja.org/forums/vb/showthread.php?t=188457

"Madness" build here:
http://www.ifsja.org/forums/vb/showthread.php?t=89280
Reply With Quote
  #611  
Old 11-10-2022, 09:36 AM
rang-a-stang's Avatar
rang-a-stang rang-a-stang is offline
Administrator
 
Join Date: Oct 31, 2016
Location: Camarillo, CA/Boise, ID
Posts: 4,881
Quote:
Originally Posted by cu4whln
But first, need to hook up the "Squid Launchers"!


BWAHHAHAHAHAHAHAHA!!! That is EXACTLY what the emblem looks like
__________________
79 Cherokee Chief (SOLD, goodbye old buddy)
(Cherokee Build Thread)
11 Nissan Pathfinder Silver Edition 4x4
09 Mazdaspeed3 Grand Touring
00 Baby Cherokee
Reply With Quote
  #612  
Old 11-10-2022, 08:50 PM
cu4whln's Avatar
cu4whln cu4whln is offline
304 AMC
 
Join Date: May 16, 2008
Location: Canton, Mi USA !
Posts: 1,652
In Today's News . . .

Houston, we have a cluster - ( F*3k )

Today was a bunch of small things that needed to be done before installing the cluster.

First up, route the driver power seat wires and get it operational

So, next time, I might do this before I install the carpet.
Pulled it back as best I could, and fished under the seat until I found the wire.

Next, I soldered a circuit breaker into the hot lead.
Installed this in an inline fuse holder. This way, if the seat jams, it will stop working, but reset in a few seconds.

Then added a ground, which I put on the driver side squid launch cable mount.

Next up: Tried to clean up the rats nest of wiring .. not well I might add!

Dropped the column down, and laid a towel down to protect it.
Grab the cluster...

First up, get the heater cable mounted...
Well, that was not easy.
The engineers didn't leave enough length to work with. Much fidgeting in the tight area and I eventually got it.

Then hooked up the vacuum lines.
Note, I marked these with a paint pen when I took it apart.
I also added extra length to the lines to make this easier.

Next, in the now small available area, I tracked down all the wiring and connections.
Very glad I added labels to all the connections. Was still hard.


[IMG]http://[/IMG]

All plugged in and hooked up . . .

[IMG]http://[/IMG]

Ease it into position, trying to be careful to not scratch up the Dash as I go.

Mostly successful ... lol


[IMG]http://[/IMG]

Screw the cluster in, bolt up the column, then put on the column trim.

[IMG]http://[/IMG]

And it's in!

Now for a test, and drive...
All working, except the fuel gauge.
That is grounded out somewhere and not working.
I knew this, just haven't dealt with it yet.

[IMG]http://[/IMG]

More to do yet, but that was enough for today.

Fun fact:
The cluster started to rack up miles as this is the first time it was hooked up and driven.
Need to calibrate the speedo as it reads about 10 mph fast right now.
BUT that's for another day.
__________________
It's not yours 'til ya bleed on it . . .

1977 "401" 'Da Chief
1979 Chero: "Madness" [Sold]
1985 CJ : Renegade -locked and loaded
2005 Unlimited Rubicon - Built
2001 XJ : Driver - 2016 JK 2 door

'Da Chief here: http://www.ifsja.org/forums/vb/showt...ighlight=chief

Round 2- LT Swap: 'Da Chief:
http://www.ifsja.org/forums/vb/showthread.php?t=188457

"Madness" build here:
http://www.ifsja.org/forums/vb/showthread.php?t=89280

Last edited by cu4whln : 11-11-2022 at 09:00 AM.
Reply With Quote
  #613  
Old 11-10-2022, 09:14 PM
78 WIDETRAC's Avatar
78 WIDETRAC 78 WIDETRAC is offline
350 Buick
 
Join Date: Aug 19, 2003
Location: Portland, Or
Posts: 798
cu.... Your jeep is coming together nicely. For a one man band you have skills of many.
Your build is like a Jeep book we all wish we had on our shelves for reference and details that are not shown in regular books or manuals.

Thanks for the fine documentation!
Reply With Quote
  #614  
Old 11-11-2022, 08:58 AM
cu4whln's Avatar
cu4whln cu4whln is offline
304 AMC
 
Join Date: May 16, 2008
Location: Canton, Mi USA !
Posts: 1,652
Quote:
Originally Posted by 78 WIDETRAC
cu.... Your jeep is coming together nicely. For a one man band you have skills of many.
Your build is like a Jeep book we all wish we had on our shelves for reference and details that are not shown in regular books or manuals.

Thanks for the fine documentation!

Thanks!

It's just Me, Patience, Persistence, and my Wallet !!

__________________
It's not yours 'til ya bleed on it . . .

1977 "401" 'Da Chief
1979 Chero: "Madness" [Sold]
1985 CJ : Renegade -locked and loaded
2005 Unlimited Rubicon - Built
2001 XJ : Driver - 2016 JK 2 door

'Da Chief here: http://www.ifsja.org/forums/vb/showt...ighlight=chief

Round 2- LT Swap: 'Da Chief:
http://www.ifsja.org/forums/vb/showthread.php?t=188457

"Madness" build here:
http://www.ifsja.org/forums/vb/showthread.php?t=89280
Reply With Quote
  #615  
Old 11-11-2022, 06:54 PM
letank's Avatar
letank letank is offline
AMC 4 OH! 1
 
Join Date: Jun 03, 2002
Location: San Francisco
Posts: 4,089
Quote:
Originally Posted by cu4whln
Lug nuts?

I bought a new set from BJs Off Road.

[IMG]http://[/IMG]



thank you for the pict, now I understand, I have different hub covers, that screw from the outside.



As for the gas gauge... even with a new sender -4 years old- I added a wire from the tank sending unit to the dash, going from the left inner quarter panel loom opening that feed to the right side lights, and wiggled the wire around the wheel well and under the carpet... Still poor gas gauge, too much resistance... probably need a new sending unit.
__________________
Michel
74 wag, 349Kmiles on original ticker/trany, except for the rust. Will it make it to the next get together without a rebuilt? Status: needs a new body.
85 Gwag, 229 Kmiles. $250 FSJ test lab since 02, that refuses to give up but still leaks.

See Ouray 2013, Engine bits and Fuel and brake lines, and Body work
Reply With Quote
  #616  
Old 11-19-2022, 07:46 PM
cu4whln's Avatar
cu4whln cu4whln is offline
304 AMC
 
Join Date: May 16, 2008
Location: Canton, Mi USA !
Posts: 1,652
In Today's News . . .

UPDATE

Well, that's a "Wrap" for now most likely.

It has DUMPED snow here in Michigan, big time.



So no more test drives. Hell, it was literally 71 a week ago?

Today? High of 28.

No heat in the garage. So any work will be slow and cold.

Also - we are heading to Florida for the winter soon.

I am done with cold winters now that retirement has arrived.

Just wanted to update all who have been watching my thread.

[IMG]http://[/IMG]
__________________
It's not yours 'til ya bleed on it . . .

1977 "401" 'Da Chief
1979 Chero: "Madness" [Sold]
1985 CJ : Renegade -locked and loaded
2005 Unlimited Rubicon - Built
2001 XJ : Driver - 2016 JK 2 door

'Da Chief here: http://www.ifsja.org/forums/vb/showt...ighlight=chief

Round 2- LT Swap: 'Da Chief:
http://www.ifsja.org/forums/vb/showthread.php?t=188457

"Madness" build here:
http://www.ifsja.org/forums/vb/showthread.php?t=89280

Last edited by cu4whln : 11-20-2022 at 06:24 AM.
Reply With Quote
  #617  
Old 11-19-2022, 08:47 PM
bkilby's Avatar
bkilby bkilby is offline
350 Buick
 
Join Date: Jan 10, 2016
Location: Burbank Ca.
Posts: 1,063
Slacker. When are you flying south for the winter?
__________________
1974 Cherokee S. It's driving but needs more work. As usual!
Reply With Quote
  #618  
Old 11-20-2022, 09:47 AM
cu4whln's Avatar
cu4whln cu4whln is offline
304 AMC
 
Join Date: May 16, 2008
Location: Canton, Mi USA !
Posts: 1,652
Quote:
Originally Posted by bkilby
Slacker. When are you flying south for the winter?


That's me !

"MR Slacker" to you !!

( ie Takes one to know one . . . )

On a side note, it was 17 F this am..

I decided to go out to the garage after snow clearing duty.

Why? to see how this GM "LT" engine would cold start / move.

Result: Fired right up in a second, backed right up, no problem.

No fuss, no muss.

__________________
It's not yours 'til ya bleed on it . . .

1977 "401" 'Da Chief
1979 Chero: "Madness" [Sold]
1985 CJ : Renegade -locked and loaded
2005 Unlimited Rubicon - Built
2001 XJ : Driver - 2016 JK 2 door

'Da Chief here: http://www.ifsja.org/forums/vb/showt...ighlight=chief

Round 2- LT Swap: 'Da Chief:
http://www.ifsja.org/forums/vb/showthread.php?t=188457

"Madness" build here:
http://www.ifsja.org/forums/vb/showthread.php?t=89280
Reply With Quote
  #619  
Old 11-20-2022, 09:49 PM
JPSwapMohn's Avatar
JPSwapMohn JPSwapMohn is offline
304 AMC
 
Join Date: May 01, 2004
Location: CO.
Posts: 1,521
I have gotta get my seats down like that.. Your floorboards are less lumpy than the late-models (88 for mine), but I think I am going to have to get creative with cutting down the feet of the brackets I have. I just don't seem to be brave enough to cut a slice out of the trans tunnel..

Congrats on another great build! I am sure you will winterize everything before heading out of the driveway and pointing South.
__________________
One day I will wake up and realize that my jeep is complete...one day, I just know it.

88Wag, LT1/4L60E/NP242, F150 fuel cell, discs, J20 axles, Truetrac & Grizzly, 3.73
http://imgbox.com/g/rNuIasKYrS
95YJ, STaK 300, D44's, SOA, ARB's, 4.56s, Bilsteins, 35" KM2's
50 CJ3A
77 J-10, 360/T-18/D20, SOLD
Reply With Quote
  #620  
Old 11-22-2022, 07:15 AM
cu4whln's Avatar
cu4whln cu4whln is offline
304 AMC
 
Join Date: May 16, 2008
Location: Canton, Mi USA !
Posts: 1,652
Quote:
Originally Posted by JPSwapMohn
I have gotta get my seats down like that.. Your floorboards are less lumpy than the late-models (88 for mine), but I think I am going to have to get creative with cutting down the feet of the brackets I have. I just don't seem to be brave enough to cut a slice out of the trans tunnel..

Congrats on another great build! I am sure you will winterize everything before heading out of the driveway and pointing South.


JP- Thank You.

I hope your build is progressing!



Seats:

You just gotta attack it.

This was certainly not an easy task, but I did one seat at a time.

Each side had it's challenges, and the driver power side was "fun"

That said, it's worth the trip. Seats are very comfortable.
__________________
It's not yours 'til ya bleed on it . . .

1977 "401" 'Da Chief
1979 Chero: "Madness" [Sold]
1985 CJ : Renegade -locked and loaded
2005 Unlimited Rubicon - Built
2001 XJ : Driver - 2016 JK 2 door

'Da Chief here: http://www.ifsja.org/forums/vb/showt...ighlight=chief

Round 2- LT Swap: 'Da Chief:
http://www.ifsja.org/forums/vb/showthread.php?t=188457

"Madness" build here:
http://www.ifsja.org/forums/vb/showthread.php?t=89280
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
What's a SUPER Chief - OLD TOPIC MESS UP...REPLY HERE! testuser General FSJ Tech 10 12-06-2015 11:10 AM
Difference between chief and chief "s"? rentalrider General FSJ Discussion 2 04-22-2011 03:33 PM
Cherokee vs. Cherokee Chief ??? Jeff in north Texas General FSJ Discussion 6 07-19-2008 09:54 AM
1977 Cherokee Chief - Lea Adams Dome Cherokees 0 08-21-2005 11:45 AM


All times are GMT -6. The time now is 08:55 PM.


Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
corner corner