 |
|
09-23-2009, 08:57 AM
|
|
New Member
|
|
Join Date: Oct 08, 2008
Location: Traverse City, MI
Posts: 16
|
|
I always intend on snapping lots of pictures, then I get working and say screw it. For the front bulkhead I ended up leaving another .5 to .25" so I could fold the excess over to make it a lil easier to weld.
The rear of the bed is about 51" and I believe the front measures 56" so its not much
I always see guys doing the truggy thing with a couple hundred bux worth of tubing but I like doing things different.
BTW FSJ doors are good for replacement wheel wells..I used a nasty one I had laying around and plasma'd out a nice replacement well 
__________________
79' J20 360/400/203/205/60/HO72 42" PBRs on H1s
Last edited by Cartman : 09-23-2009 at 09:04 AM.
|
09-24-2009, 06:34 PM
|
 |
Master Mechanic
|
|
Join Date: Nov 14, 2000
Location: Rochester Hills, MI USA
Posts: 1,259
|
|
|
Looks nice Cartman! I likey likey the shortened rear and box ... way cool!
|
09-25-2009, 06:48 AM
|
 |
|
|
Join Date: Aug 17, 2002
Location: Bethel, NC
Posts: 5,408
|
|
Quote:
|
Originally Posted by Cartman
some updated pictures..
torched out the old tailgate center, a 48x18x18 toolbox is eventually going in the bed and I'll pop rivet or tack weld this to the box. I just threw this on to see what it would look like
http://i468.photobucket.com/albums/r...g?t=1253713193 |
putting a toolbox is a great idea IMO. I've got one and it can hold all kinds of stuff. plenty of storage and it doesn't go flying when you flop or roll. I think I put too much in there now. I've got every tool under the sun I think.
__________________
Need a Willys Pickup to restore
Places to Wheel in the Southeast
Quote:
|
Originally Posted by Topgun2mo
I would think boxing would limit the amount the frame could flex over obstacles which I think IMO would be a bad thing. I would think you would want all the articulation possible.
|
Quote:
|
Originally Posted by johnny019
I'm not saying lockers don't improve the performance of your rig, just that they're overrated.
|
|
05-26-2012, 11:57 AM
|
|
New Member
|
|
Join Date: Oct 08, 2008
Location: Traverse City, MI
Posts: 16
|
|
back from the dead!
built a winch bumper, got the H4 conversion headlights and 55/100 bulbs and some 150W 'driving' lights
custom dash out of a road sign
used some sweet seats out of an 80' Laredo
shot of the engine compartment, need to do more work here to clean it up
got a good deal on an oasis compressor and my craftsman compressor died so I used it's tank.
routed the exhaust up as far as possible
finished the front steering, had to construct a small spacer due to the diameter tubing I used so it wouldn't interfere
ran the pipes thru the rear bumper (stupid tree)
__________________
79' J20 360/400/203/205/60/HO72 42" PBRs on H1s
|
05-26-2012, 01:17 PM
|
 |
Grease Monkey
|
|
Join Date: Feb 08, 2008
Location: Stoughton,MA
Posts: 475
|
|
|
I think I'm in love
__________________
79' J10 360/T18/D20- Locked & bobbed on 35s 
|
05-27-2012, 07:16 AM
|
 |
Grease Monkey
|
|
Join Date: Nov 14, 2010
Location: Southern Indiana
Posts: 423
|
|
Quote:
|
Originally Posted by cmelo
I think I'm in love
|
I'll wrastle ya for her
__________________
79 Cherokee 360, T-18, Dana 20, Locked tons. I give up.
08 Liberty, 97 Z71
|
05-27-2012, 07:42 AM
|
 |
FSJ Maniac
|
|
Join Date: Sep 25, 2001
Location: new mexico,carlsbad
Posts: 3,546
|
|
the rear axle,HO72= eaton right?
btw nice rig
__________________
77Chero,360/t400/231/d300,d60,c14bolt 5.13's 42"rockerz
84wag,360/tf727/208,hp d60,d60,4.10's,37"goodyears(old style mtr)
|
05-27-2012, 12:04 PM
|
|
New Member
|
|
Join Date: Oct 08, 2008
Location: Traverse City, MI
Posts: 16
|
|
|
Yeah it's an ho72 with 2" spacers to get the wms to match the d60.
I welded it and put on a 1410 yoke, redrilled for u-bolts.
I will upgrade this to a 14b Detroit and use the 30 spline 14b shafts. Eatons have a 17? spline so the 14b stuff is a good upgrade
Thanks guys lots of hard work!!
__________________
79' J20 360/400/203/205/60/HO72 42" PBRs on H1s
|
05-29-2012, 06:17 AM
|
 |
FSJ Maniac
|
|
Join Date: Jul 05, 2006
Location: Houston, Texas
Posts: 2,979
|
|
|
Thats a no BS, wheelin machine right there! Love it, nice job.
__________________
" Kaiser" - 1981 J20 113" WB - 360 w/ hei/727/208-d44hd front aussie/d60 rear welded - CS144/Taurus fan/flatbed and roll bar
Future mods - 6.0l chevy, hp60, 14-bolt, NWF Black Box/NP205, 5.13's, SOA, 42's 
Build Thread
Fight Crime...Shoot Back.
Texas FSJA!
ΜΟΛΩΝ ΛΑΒΕ
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 07:27 AM.
|
