Well after a lot of hearing that it couldn't be done, i finally got my new seats swapped in. The donor was a 92 Chevy burb. The general concensus was that the seats are too tall and too wide. I'm 6'2" and i dont have any problem with hitting my head on the roof.
I started out mocking up the GM seats to the factory jeep seat bases.
The spread on the mounting holes is obviously different so time to break out the welder and add some steel. I tried to keep from adding height to the seat bases here...
just tacked for a test fit:
a coat of paint for good measure...
I started out mocking up the GM seats to the factory jeep seat bases.
The spread on the mounting holes is obviously different so time to break out the welder and add some steel. I tried to keep from adding height to the seat bases here...
just tacked for a test fit:
a coat of paint for good measure...
Comment