steel wheel widening

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Zorm
    304 AMC
    • Apr 08, 1997
    • 1972
    #1

    steel wheel widening

    Trying to find a company out there that can do this. I have a 72 F250 that I want to keep the stock steel look but want to them wider. Haven't really found wide 8 lug wheel that will let me keep the stock hubcaps. Also have a friend that is looking to widen his stock MG steel wheels, he races it.
    So if you draw a semi circle with Pensacola in the center, I am looking in an area 8 hours drive from Pensacola, so, from Huston, to Nashville to Charlotte to Tampa, well, a little more then a semi circle

    thanks gents
    83 Cherokee 4dr WT(axles) 4" lift, 351w, nv3550, NP208, installing soon

    65 Corvair Corsa Convertible, 4 speed, 140 quad carb engine

    71 F-250 Camper Special (in rewire stage)


    HE guides my path, forgives me when I stray and lights my life.
    Tags: None
  • serehill
    Gone,Never Forgotten.
    • Nov 22, 2009
    • 8619
    #2
    look at this.

    http://www.southwestwheel.com/?gclid...FYOPHwod7QEN_A not in your circumference but they will ship.

    80 Cherokee
    360 ci 727 with
    Comp cams 270 h
    NP208
    Edlebrock performer intake
    Holley 4180
    Msd total multi spark.
    4" rusty's springs
    Member, FSJ Prissy Restoration Association

    If you can't make it better why waste your time. No use repeating the orignal mistakes. I'm to old to push it that's why.

    Comment

    • draglink
      350 Buick
      • Aug 17, 2008
      • 840
      #3
      Stockton Wheel Service, Inc. | Tire & Wheel Accessories
      http://www.stocktonwheel.com/
      Stockton Wheel Service has been providing specialty tires, wheels, auto parts, accessories, and custom wheel services for over 124 years.
      '86 GW 6" Rustys, 1 1/2" BJs shackles, 33 BFGs

      Comment

      • jpcoutts
        304 AMC
        • Jun 28, 2002
        • 2114
        #4
        Marsh Racing Wheels in northwest Arkansas can help you I believe.

        MRT Wheels
        http://mrt-wheels.com/
        MANUFACTURERS OF "CUSTOM BUILT" MOTORSPORTS WHEELS
        Jim C
        '67 J3000 Dually
        '86 J20
        '79 CJ5(in pieces)
        '86 CJ7 Doesn't need anything(so why do I have it?)
        Correction- it just needed a water pump!

        Comment

        Previous template Next
        Working...
        X