Need help - Brake line routing J10

[Pavementsux91XJ]

Soooo I took my 76 j truck apart a long time ago, now I'm trying to install a new brake hard line kit and I can't remember the routing on the rear hard line that goes between the prop valve and the rear soft line. Can somebody take a couple pics for me?

Thanks in advance!

[J10blues]

Soooo I took my 76 j truck apart a long time ago, now I'm trying to install a new brake hard line kit and I can't remember the routing on the rear hard line that goes between the prop valve and the rear soft line. Can somebody take a couple pics for me?

Thanks in advance!

These are from my 77 J10, it shows the lines from the prop valve running all the way back to the fitting that goes on the frame cross member where it splits from hard line to soft and then down to the splitter on the axle, hope this helps.

http://s30.photobucket.com/user/beenze1/library/J10%20Brake%20Lines?sort=3&page=1

[Pavementsux91XJ]

Helps a lot. Thanks for your time. What about the cross member right behind the cab? over, it or through one of the holes?

[J10blues]

Brake line routing

Helps a lot. Thanks for your time. What about the cross member right behind the cab? over, it or through one of the holes?

Over the crossmember, the hard lines are bent to form over it. There are two holes on the crossmember on the driver's side, one large one and a smaller one under, only the electrical lines go through the big hole and the EBrake cable goes through the smaller hole below.

[Pavementsux91XJ]

THANK YOU!!!!!!