I don't know if anyone out there has done this, but feel free to throw out any opinions or ideas. I've got a 66' J3000 that I've been working on and I'm getting ready to redo the front suspension. I'm planning to move the springs under the frame (like 74 and newer), use BJ's 4" lift springs and change the axle to a SOA setup ( I've already got the axle). I read an article in JP magazine where they used a YJ shackle reversal kit to move the springs under the frame and it seemed like a good way to do it. I'm just wondering if I should install the springs with the shackle in the front ( like the factory) or do the shackle reversal. The truck has the vigilante 327 and a PTO winch on the front so it's pretty front heavy. I'm a little worried about the truck nose diving with the lift and shackle reversal. I'm also looking for any info on changing the truck to power steering. Any help would be great.
Scuba
Scuba
Comment