Floor pan

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Zorm
    304 AMC
    • Apr 08, 1997
    • 1972

    Floor pan

    What would be easier, cutting a floor pan out of a 4 door to modify for a 2 door or piecing together floor pans for the 2 door?
    83 Cherokee 4dr WT(axles) 4" lift, 351w, nv3550, NP208, installing soon

    65 Corvair Corsa Convertible, 4 speed, 140 quad carb engine

    71 F-250 Camper Special (in rewire stage)


    HE guides my path, forgives me when I stray and lights my life.
  • Full Size Jeeper
    304 AMC
    • Jul 20, 2014
    • 2475

    #2
    If you buy replacement pans new for the wagon that needs them, you just saved the time of cutting the ones out of the parts wagon. If you have time, cut them out. If you have money, buy them. Good luck.
    1978 Wagoneer

    401/turbo 400 trans. Quadra-Trac BW1339 (with Low) 4" Rusty's lift with 31" Summit Mud Dawgs

    Mods:
    Fuel Tank, Red Holley Fuel Pump, Razor Grill (profile pic out dated), Rebuilt steering box

    Comment

    • ZackN920
      350 Buick
      • Nov 18, 2015
      • 944

      #3
      I just used stuff I had laying around for mine.

      Easiest would be what FSJ said. Depends what you want to do, cheap(but more work) or easy(spend money)?
      1990 Jeep Grand Wagoneer-"Big Jeep"

      AMC 360, TF727, NP229, 2.72 gears, 2" lift
      Rancho 44044 springs, Rusty's 2" AAL, TFI w/ MSD C/R
      ...in pieces for more rust repair...

      Comment

      • rang-a-stang
        Administrator
        • Oct 31, 2016
        • 5509

        #4
        The floor pans are the same between 2 and 4 doors, right? I thought all floor pans were the same except the trans hump changed in 80....? Right?
        Chuck McTruck 71 J4000
        (Chuck McTruck Build Thread)
        (8.1L swap questions - PerformanceTrucks.net Forums​)
        79 Cherokee Chief (SOLD, goodbye old buddy)
        (Cherokee Build Thread)
        11 Nissan Pathfinder Silver Edition 4x4
        09 Mazdaspeed3 Grand Touring
        00 Baby Cherokee

        Comment

        • Heep-J4000
          350 Buick
          • Feb 09, 2014
          • 872

          #5
          Were are you buying new floor plans and sheet metal for the full size Jeeps and J-trucks these days?
          Jeep "because mother nature hates flat roads to"

          http://www.ifsja.org/forums/vb/showthread.php?t=180974

          99' Dodge ram 2500 4x4 crew cab 5.9 Cummins ,backup work truck for now
          73' Jeep J4000 (named Heep or Desert Dragon) amc 360 V8 converted to LPG with T15/D20 (was my daily work truck for thirteen years and is getting major overhaul at the moment!)
          80' Jeep cj5 350 V8 Chevy/sm420/D300 project
          70/71 Jeep J4000 parts truck with Buick 350

          Former vehicles:
          85' Volkswagen caddy mk1 1.6 diesel.
          83 Toyota land cruiser BJ42 3.4 diesel.

          Comment

          • Full Size Jeeper
            304 AMC
            • Jul 20, 2014
            • 2475

            #6
            I bought from BJ's Off Road and Classic 2 Current. I think my quarter panel patches came from BJ's and the floor pans came from C2C. Fit was as expected with after market stuff. Lots of other places have them. Maybe someone else can chime in on other sellers.
            1978 Wagoneer

            401/turbo 400 trans. Quadra-Trac BW1339 (with Low) 4" Rusty's lift with 31" Summit Mud Dawgs

            Mods:
            Fuel Tank, Red Holley Fuel Pump, Razor Grill (profile pic out dated), Rebuilt steering box

            Comment

            Working...
            X