Tweet
Trying to find a source for a driver's side rear axle shaft with the bearing, etc installed. I'm getting some conflicting information and was wondering if anyone on this board has a source for a shaft? Team Grand Wagoneer sells them in pairs, but I only need one.
-
-
I'd try Randies Ring and Pinion in WAjoe
"Don't mind me. I'm just here for the alibi" -
Year, model? I'd go to the WTB forum here and buy used. Your local automotive machine shop can install a new seal/bearing/retainer if you want new bearings. Or try Montana Overland.Originally posted by mgmannTim Reese
Maine beekeeper's truck: '77 J10 LWB, 258/T15/D20/3.54 bone stock, low options (delete radio), PS, hubcaps.
Browless and proud: '82 J20 360/T18/NP208/3.73, Destination ATs, 7600 GVWR
Copper Polly: '75 CJ-6, 304/T15, PS, BFG KM2s, soft top
GTI without the badges: '95 VW Golf Sport 2000cc 2D
ECO Green: '15 FCA Jeep Cherokee KL TrailhawkComment
-
I found mine on eBay. Jeeprecyclers probably have some too1982 Wagoneer w/258, Rusty's 4in spring lift, motorcraft 2100, 32x11.5x15 bfg's *sold*
1972 J4000 Chevy 350, th350, divorced Dana 20, Holley carb, alcan 4in springs, 35in BFGs on 15in slots
1978 J10 golden eagle w/Levis interior, 401and th400, Edelbrock avs2, 32x11.5 falken rubitreks on stock golden eagle wheelsComment
Comment