Will windshield brow fit on later models (J10)?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Autobon7
    230 Tornado
    • Oct 14, 2014
    • 1

    Will windshield brow fit on later models (J10)?

    Sorry for the newb question but an hour google search has turned up nothing.
  • babywag
    out of order
    • Jun 08, 2005
    • 10286

    #2
    Yes, but the roof is different. Later model browless roof isn't as "tall"
    Tony
    88 GW, 67 J3000, 07 Magnum SRT8

    Comment

    • rocklaurence
      Moderator

      Moderator
      • Jan 14, 2009
      • 1841

      #3
      You can do it two different ways--both require a lot of work. First, skin the roof around the seams and add the skin to the other frame. Or do what I did and cut the roof off at the 4 pillars and graft it into the new vehicle. Measure the front and rear glass areas as the reference to make sure that it all goes back together correctly and the glass will fit again.
      Here's the build
      Hey guys, I almost forgot to post up this project. The shop [Ugly] truck was rust free with the exception of the top. So, after driving it for 3 years with fiberglass and tape holding it together. I'm replacing the top with a good '76 with a brow. The custom dash wont have a pad, will have a gauge panel instead of the ash tray

      Comment


      • #4
        Someone was going to make fiberglass replacements.
        Jeep gauges are for amusement only. Any correlation between them and reality is purely coincidental.

        Comment

        Working...
        X