International Full Size Jeep Association
Home Forums Reader's Rigs Tech Library Trail Stories FSJ-List
International Full Size Jeep Association  

Go Back   International Full Size Jeep Association > Tire Kickin' > General FSJ Discussion

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-19-2019, 09:08 PM
NBD925 NBD925 is offline
232 I6
 
Join Date: Oct 16, 2014
Location: Montana
Posts: 118
J-10 258 Engine Bay rubber

Does anyone know where to get the rubber strips that keep mud and debris out of the engine bay? I
__________________
1977 Jeep J10
258 Engine
Weber 38 carb
T15 Trans
Dana 20 with Tera Low
Dana 44 Front and Rear axles
Custom 16 inch rims 235x85 R16 Duratrac tires
Reply With Quote
  #2  
Old 10-20-2019, 09:20 PM
Full Size Jeeper's Avatar
Full Size Jeeper Full Size Jeeper is online now
304 AMC
 
Join Date: Jul 20, 2014
Location: Mandeville Louisiana
Posts: 1,802
A few of us have made them. I bought some reinforced rubber gasket material and cut my own.I don,t think anyone is making them. Good luck.
__________________
1978 Wagoneer

401/turbo 400 trans. Quadra-Trac BW1339 (with Low) 4" Rusty's lift with 31" Summit Mud Dawgs

Mods:
Fuel Tank, Red Holley Fuel Pump, Razor Grill (profile pic out dated), Rebuilt steering box

Last edited by Full Size Jeeper : 10-20-2019 at 09:33 PM.
Reply With Quote
  #3  
Old 10-20-2019, 09:22 PM
Full Size Jeeper's Avatar
Full Size Jeeper Full Size Jeeper is online now
304 AMC
 
Join Date: Jul 20, 2014
Location: Mandeville Louisiana
Posts: 1,802
__________________
1978 Wagoneer

401/turbo 400 trans. Quadra-Trac BW1339 (with Low) 4" Rusty's lift with 31" Summit Mud Dawgs

Mods:
Fuel Tank, Red Holley Fuel Pump, Razor Grill (profile pic out dated), Rebuilt steering box
Reply With Quote
  #4  
Old 10-20-2019, 09:27 PM
Full Size Jeeper's Avatar
Full Size Jeeper Full Size Jeeper is online now
304 AMC
 
Join Date: Jul 20, 2014
Location: Mandeville Louisiana
Posts: 1,802
__________________
1978 Wagoneer

401/turbo 400 trans. Quadra-Trac BW1339 (with Low) 4" Rusty's lift with 31" Summit Mud Dawgs

Mods:
Fuel Tank, Red Holley Fuel Pump, Razor Grill (profile pic out dated), Rebuilt steering box
Reply With Quote
  #5  
Old 10-20-2019, 09:30 PM
Full Size Jeeper's Avatar
Full Size Jeeper Full Size Jeeper is online now
304 AMC
 
Join Date: Jul 20, 2014
Location: Mandeville Louisiana
Posts: 1,802
__________________
1978 Wagoneer

401/turbo 400 trans. Quadra-Trac BW1339 (with Low) 4" Rusty's lift with 31" Summit Mud Dawgs

Mods:
Fuel Tank, Red Holley Fuel Pump, Razor Grill (profile pic out dated), Rebuilt steering box
Reply With Quote
  #6  
Old 10-20-2019, 09:31 PM
Full Size Jeeper's Avatar
Full Size Jeeper Full Size Jeeper is online now
304 AMC
 
Join Date: Jul 20, 2014
Location: Mandeville Louisiana
Posts: 1,802
__________________
1978 Wagoneer

401/turbo 400 trans. Quadra-Trac BW1339 (with Low) 4" Rusty's lift with 31" Summit Mud Dawgs

Mods:
Fuel Tank, Red Holley Fuel Pump, Razor Grill (profile pic out dated), Rebuilt steering box
Reply With Quote
  #7  
Old 10-20-2019, 10:08 PM
NBD925 NBD925 is offline
232 I6
 
Join Date: Oct 16, 2014
Location: Montana
Posts: 118
Wow that looks great! Nice work. Is that attachment method based on how the original rubber was attached? If so I need to look for those attachment holes.

I don’t have any of the original material to make patterns, does anyone have pictures of a 258 engine bay or have pictures of the patterns.

It’s funny these parts don’t show up in the parts books. At least I haven’t seen them.
__________________
1977 Jeep J10
258 Engine
Weber 38 carb
T15 Trans
Dana 20 with Tera Low
Dana 44 Front and Rear axles
Custom 16 inch rims 235x85 R16 Duratrac tires

Last edited by NBD925 : 10-21-2019 at 12:17 AM.
Reply With Quote
  #8  
Old 10-21-2019, 07:57 AM
Full Size Jeeper's Avatar
Full Size Jeeper Full Size Jeeper is online now
304 AMC
 
Join Date: Jul 20, 2014
Location: Mandeville Louisiana
Posts: 1,802
Sorry, I do not have a pattern. And I tossed out the old ones. Kaiserjeeps may have a pattern, might private message him. Yes used the same hole location, just drilled them a little bigger for the wire I had.
__________________
1978 Wagoneer

401/turbo 400 trans. Quadra-Trac BW1339 (with Low) 4" Rusty's lift with 31" Summit Mud Dawgs

Mods:
Fuel Tank, Red Holley Fuel Pump, Razor Grill (profile pic out dated), Rebuilt steering box
Reply With Quote
  #9  
Old 10-21-2019, 08:09 AM
Full Size Jeeper's Avatar
Full Size Jeeper Full Size Jeeper is online now
304 AMC
 
Join Date: Jul 20, 2014
Location: Mandeville Louisiana
Posts: 1,802
Here is the jig I made to make my stainless staples. Most of my ideas were stolen from other members on this site (mostly Kaiserjeeps build thread), anyway good luck with your build.
__________________
1978 Wagoneer

401/turbo 400 trans. Quadra-Trac BW1339 (with Low) 4" Rusty's lift with 31" Summit Mud Dawgs

Mods:
Fuel Tank, Red Holley Fuel Pump, Razor Grill (profile pic out dated), Rebuilt steering box
Reply With Quote
  #10  
Old 10-21-2019, 08:10 AM
Full Size Jeeper's Avatar
Full Size Jeeper Full Size Jeeper is online now
304 AMC
 
Join Date: Jul 20, 2014
Location: Mandeville Louisiana
Posts: 1,802
__________________
1978 Wagoneer

401/turbo 400 trans. Quadra-Trac BW1339 (with Low) 4" Rusty's lift with 31" Summit Mud Dawgs

Mods:
Fuel Tank, Red Holley Fuel Pump, Razor Grill (profile pic out dated), Rebuilt steering box
Reply With Quote
  #11  
Old 10-21-2019, 08:11 AM
Full Size Jeeper's Avatar
Full Size Jeeper Full Size Jeeper is online now
304 AMC
 
Join Date: Jul 20, 2014
Location: Mandeville Louisiana
Posts: 1,802
__________________
1978 Wagoneer

401/turbo 400 trans. Quadra-Trac BW1339 (with Low) 4" Rusty's lift with 31" Summit Mud Dawgs

Mods:
Fuel Tank, Red Holley Fuel Pump, Razor Grill (profile pic out dated), Rebuilt steering box
Reply With Quote
  #12  
Old 10-21-2019, 11:06 PM
ZackN920's Avatar
ZackN920 ZackN920 is offline
350 Buick
 
Join Date: Nov 18, 2015
Location: Stephenson County, IL
Posts: 906
Very nice looking work Full Size Jeeper.

So, are these just between the inner fender and the outer fender? Cause that's how it looks... On my 90', they appear to be glued in, not stapled(?) in.

Is anything on these jeeps supposed to go in between the inner fender and the frame rail? I got at least a 2" gap between the 2 and can see the engine when looking in the wheel well. No other vehicle I have is set up like that, they have more material keeping the engine bay and the wheel well separate.
Same deal with the rear's as well, gap between frame and body just wide open for road gunk to end up.
__________________
1990 Grand Wagoneer-"The Crapwagon"
AMC 360, TF727, NP229, 3.31gears, 2" lift
Rancho 44044, Rusty's 2" AAL, TFI
...not too rusty anymore
Plenty of patina

The others
1926 Dodge Brothers Business Sedan 212 I4-CRANK START
1987 Lincoln Town Car Signature Series-5.0 AOD (WD)
1987 Dodge Dakota LE 3.9, A999, 3.90 gear (DD)
1994 GMC 'Burban 5.7, 4L60E, NP241, 3.42 gear (DD)
2001 Jeep Cherokee 4.0, AW4, NP231, 3.73 (limbo)
Reply With Quote
  #13  
Old 10-22-2019, 11:55 AM
Full Size Jeeper's Avatar
Full Size Jeeper Full Size Jeeper is online now
304 AMC
 
Join Date: Jul 20, 2014
Location: Mandeville Louisiana
Posts: 1,802
On my 78 wagoneer, it had one piece of rubber on the drivers side, nothing on passenger side.
__________________
1978 Wagoneer

401/turbo 400 trans. Quadra-Trac BW1339 (with Low) 4" Rusty's lift with 31" Summit Mud Dawgs

Mods:
Fuel Tank, Red Holley Fuel Pump, Razor Grill (profile pic out dated), Rebuilt steering box
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Diagnose engine problems using starter Perfex General FSJ Tech 0 04-14-2010 03:51 AM
258 Engine code? brad_fsj10 General FSJ Tech 5 04-02-2004 05:59 AM
258 engine hesitation--Help wanted! Petej8 General FSJ Tech 15 11-13-2003 03:02 PM
Engine R & R write up SFFSJ General FSJ Tech 0 04-16-2003 05:03 AM
258 engine swap n8sjh General FSJ Tech 2 02-02-2003 02:55 PM


All times are GMT -6. The time now is 05:45 AM.


Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
corner corner