International Full Size Jeep Association
Home Forums Reader's Rigs Tech Library Trail Stories FSJ-List
International Full Size Jeep Association  

Go Back   International Full Size Jeep Association > Tire Kickin' > General FSJ Tech

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-31-2010, 07:13 PM
Hill Billy Deluxe's Avatar
Hill Billy Deluxe Hill Billy Deluxe is offline
Grease Monkey
 
Join Date: Feb 22, 2007
Location: Burton, MI
Posts: 252
Wing window lock

My driver side Wing window lock is missing. It is also bent, like some one tried to break in, or did. I got it like this from the PO. The Slot for the stud is bent, and the stud is gone. from looking at it, I think they must have installed the stud first, then put the Wing window in. I have a set of locks I got from the Jyard, but I have no stud to install them on.

Can i find a stud and Tack in on, grind, and reinstall the OEM lock. Or should I just be looking for a whole new replacement? how much is the replacement Wing components?
__________________
Bring a case of Budweiser and a can of PB Blaster....


1983 j10 SWB, Headlight relay upgrade.
360/727/np208, 4" Skyjacker Lift, BJ's 1/2" lift frt shackles, 31's, 2 inch body lift, Rear 22gal. Offy Dual Port, Holley 4160, Lincoln Locked AMC 20, BJ's Super knuckle kit. BJ's 8-10" Brake lines, PO Rattle Can painted, Yellow.
Reply With Quote
  #2  
Old 08-31-2010, 07:26 PM
hkjensli hkjensli is offline
Grease Monkey
 
Join Date: Jan 29, 2001
Location: Lillestrom, Norway
Posts: 284
TeamGW has them, 77 bucks http://www.teamgrandwagoneer.com/par...ailed/115.html

Never installed or replaced one myself though.
__________________
1991 GW 4bbl Edelbrock intake, carb & MSD ignition (wrecked)1988 GW bone stock (donor)(Under Recovery)
Drive safe Drive a FSJ!
Henning Kjensli
Reply With Quote
  #3  
Old 08-31-2010, 07:34 PM
Hill Billy Deluxe's Avatar
Hill Billy Deluxe Hill Billy Deluxe is offline
Grease Monkey
 
Join Date: Feb 22, 2007
Location: Burton, MI
Posts: 252
Close, but i got all those parts. I need to figure out how to fix the stud and metal frame around the Wing window which those parts @ Grandwagoneer fit on to.
__________________
Bring a case of Budweiser and a can of PB Blaster....


1983 j10 SWB, Headlight relay upgrade.
360/727/np208, 4" Skyjacker Lift, BJ's 1/2" lift frt shackles, 31's, 2 inch body lift, Rear 22gal. Offy Dual Port, Holley 4160, Lincoln Locked AMC 20, BJ's Super knuckle kit. BJ's 8-10" Brake lines, PO Rattle Can painted, Yellow.
Reply With Quote
  #4  
Old 08-31-2010, 07:41 PM
hkjensli hkjensli is offline
Grease Monkey
 
Join Date: Jan 29, 2001
Location: Lillestrom, Norway
Posts: 284
Aha... misunderstood you. There's a couple of GWs being parted out in the for sale section you may be able to get a new window setup from. I'd imagine that'd be the easiest route, plus ensuring everything turns out right.
__________________
1991 GW 4bbl Edelbrock intake, carb & MSD ignition (wrecked)1988 GW bone stock (donor)(Under Recovery)
Drive safe Drive a FSJ!
Henning Kjensli
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Manual Window Lifter Install Dmntxn77 Other 2 11-30-2012 10:59 PM
Lock and Window help BigOlWoody General FSJ Tech 3 04-10-2009 01:51 PM
What vent wing window locks will work for my 89GW GW Fisherman General FSJ Tech 2 09-19-2008 12:20 PM
!!! HELP w/ triangle wing window lock replacement PalmerBS General FSJ Tech 5 09-02-2008 08:05 PM
Repair Rant - Wing Window Lyman DeKoquonut General FSJ Tech 2 12-13-2004 01:52 AM


All times are GMT -6. The time now is 07:56 PM.


Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
corner corner