Tweet
If my bore is 4 3/16 any idea what the bore would be?
-
1978 Wagoneer
401/turbo 400 trans. Quadra-Trac BW1339 (with Low) 4" Rusty's lift with 31" Summit Mud Dawgs
Mods:
Fuel Tank, Red Holley Fuel Pump, Razor Grill (profile pic out dated), Rebuilt steering box -
Need to be more accurate.
Engine your dealing in hundreths of inch.
However 3/16 = .1875
So stock = 4.165, and yours ~4.1875
Could be .020 or .030, depending on accuracy of your measurement.
go grab a caliper from harbor freight.Tony
88 GW, 67 J3000, 07 Magnum SRT8 -
Measuring would be best, but if you have oversized pistons it should be stamped on top of them.Comment
Comment