Tweet
the one where you replace the switch with a sealed toggle switch? it had a write up and a pic of the switch mounted in the bracket matt want to know for his harness prototype
-
Abort? Retry? Ignore? >
86 GrandWag. Howell fuel Injected 360. MSD Ignition + Dizzy. 727/229 swap BJ's 2" Lift and 31's
88 Wrangler 4.2, Howell TBI and MSD - Borla Headers w/ Cat-back + winch and 31's AND a M416 trailer (-:
-
What info you looking for? I did the conversion -- the switch that was listed in the old write-up was the wrong one. The one they listed was (On)-Off-(On), instead of (On)-On-(On) that the FSJ needs so the dash switch can operate the tailgate as well as the tailgate switch.
The proper switch
Can go to BJ's and see the switch mounted in the bracket -- looks like they machined a little aluminum plate to mount it in the switch housing. I used a "U"-shaped piece of sheetmetal with a hole in it for mine.Last edited by acct21; 01-20-2019, 02:45 PM.1990 Grand Wagoneer with HD towing package -- everything works! (for now...)
Comment