International Full Size Jeep Association
Home Forums Reader's Rigs Tech Library Trail Stories FSJ-List
International Full Size Jeep Association  

Go Back   International Full Size Jeep Association > Tire Kickin' > General FSJ Tech

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-19-2014, 03:02 PM
DBX11's Avatar
DBX11 DBX11 is offline
232 I6
 
Join Date: May 18, 2009
Location: Northern Kentucky
Posts: 208
Rear Brake Spring part# ?

Part number for spring on horizontal bar that returns brake shoes to home position? Oriley's said ????????????????????????????????
Thanks in advance...
Reply With Quote
  #2  
Old 02-19-2014, 07:35 PM
OutrageGIS's Avatar
OutrageGIS OutrageGIS is offline
258 I6
 
Join Date: Feb 26, 2011
Location: Lexington, KY
Posts: 334
hardware kit

Get the hardware kit - includes all springs
Reply With Quote
  #3  
Old 02-20-2014, 10:14 AM
DBX11's Avatar
DBX11 DBX11 is offline
232 I6
 
Join Date: May 18, 2009
Location: Northern Kentucky
Posts: 208
I did

and it didn't. So I called and they said we don't carry it individually and it does not come with the kit. I'll keep trying tho its not on a dd. so I have time..
Reply With Quote
  #4  
Old 02-20-2014, 10:37 AM
tgreese's Avatar
tgreese tgreese is offline
 
Join Date: May 29, 2003
Location: Medford MA USA
Posts: 11,111
Year/model?

Could be Bendix ('73 and earlier) or Delco (?? '74 and later) brakes if it's a FSJ.

If yours is missing, your best bet is to get one from a wreck. All it does is keep the cross bar from rattling, so it does not wear out and there's no demand for new ones. Try the WTB forum here, or look for Jeeps that are being parted out on the for-sale forum.

Jake's in NC certainly has one, but that's likely a last resort.

I believe the later Wagons have Delco brakes, so you may be able to find a suitable replacement at your local pick-and-pull yard. Look at the rears of old GM cars.
__________________
Tim Reese
Maine beekeeper's truck: '77 J10 LWB, 258/T15/D20/3.54 bone stock, low options (delete radio), PS, hubcaps.
Browless and proud: '82 J20 360/T18/NP208/3.73, Destination ATs, 7600 GVWR
Copper Polly: '75 CJ-6, 304/T15, PS, BFG KM2s, soft top
GTI without the badges: '95 VW Golf Sport 2000cc 2D
ECO Green: '15 FCA Jeep Cherokee KL Trailhawk
Reply With Quote
  #5  
Old 02-20-2014, 10:43 AM
tgreese's Avatar
tgreese tgreese is offline
 
Join Date: May 29, 2003
Location: Medford MA USA
Posts: 11,111
If that does not sound like the right part, look at the diagrams here and tell us which part it is ... www.oljeep.com/gw/76_tsm/Section9.pdf
__________________
Tim Reese
Maine beekeeper's truck: '77 J10 LWB, 258/T15/D20/3.54 bone stock, low options (delete radio), PS, hubcaps.
Browless and proud: '82 J20 360/T18/NP208/3.73, Destination ATs, 7600 GVWR
Copper Polly: '75 CJ-6, 304/T15, PS, BFG KM2s, soft top
GTI without the badges: '95 VW Golf Sport 2000cc 2D
ECO Green: '15 FCA Jeep Cherokee KL Trailhawk
Reply With Quote
  #6  
Old 02-20-2014, 04:00 PM
serehill's Avatar
serehill serehill is offline
Gone,Never Forgotten.
 
Join Date: Nov 22, 2009
Location: Mesquite Texas
Posts: 8,622
This

http://www.ebay.com/itm/Carlson-H1351-2-Parking-Brake-Strut-Spring-/261402264492?pt=Motors_Car_Truck_Parts_Accessories &hash=item3cdcca03ac&vxp=mtr
__________________

80 Cherokee
360 ci 727 with
Comp cams 270 h
NP208
Edlebrock performer intake
Holley 4180
Msd total multi spark.
4" rusty's springs
Member, FSJ Prissy Restoration Association

If you can't make it better why waste your time. No use repeating the orignal mistakes. I'm to old to push it that's why.
Reply With Quote
  #7  
Old 02-20-2014, 04:35 PM
OutrageGIS's Avatar
OutrageGIS OutrageGIS is offline
258 I6
 
Join Date: Feb 26, 2011
Location: Lexington, KY
Posts: 334
Don't run those on mine - sorry
Reply With Quote
  #8  
Old 02-20-2014, 04:58 PM
tgreese's Avatar
tgreese tgreese is offline
 
Join Date: May 29, 2003
Location: Medford MA USA
Posts: 11,111

That should be a bingo if you have a post-73. Might even work on the Bendix brakes.
__________________
Tim Reese
Maine beekeeper's truck: '77 J10 LWB, 258/T15/D20/3.54 bone stock, low options (delete radio), PS, hubcaps.
Browless and proud: '82 J20 360/T18/NP208/3.73, Destination ATs, 7600 GVWR
Copper Polly: '75 CJ-6, 304/T15, PS, BFG KM2s, soft top
GTI without the badges: '95 VW Golf Sport 2000cc 2D
ECO Green: '15 FCA Jeep Cherokee KL Trailhawk
Reply With Quote
  #9  
Old 02-20-2014, 05:19 PM
Mike D's Avatar
Mike D Mike D is offline
350 Buick
 
Join Date: Jul 29, 2002
Location: Divorce is hell
Posts: 1,230
How about a pic of it assembled .. minus the part .. and well figure out whats missing
__________________
64 Wagoneer 283 SBC
50 truck
63 J-200 Truck -- free

Please, if you believe in the power of prayer, God and Jesus Christ... I beg you add my relationship with Heather Boyd to be reconciled to a new, stronger than ever, wonderful marriage ... to your prayer list and remember us daily.


Addendum:
And now that im getting Divorced .. i want to work on it , but no one else does -- ^ -- Heather, please leave your affair with Josh Smith and come back to the father of your children
Reply With Quote
  #10  
Old 02-20-2014, 05:26 PM
tgreese's Avatar
tgreese tgreese is offline
 
Join Date: May 29, 2003
Location: Medford MA USA
Posts: 11,111
Quote:
Originally Posted by Mike D
How about a pic of it assembled .. minus the part .. and well figure out whats missing

We have not heard from the OP yet. The part that serehill posted may be what he needs.
__________________
Tim Reese
Maine beekeeper's truck: '77 J10 LWB, 258/T15/D20/3.54 bone stock, low options (delete radio), PS, hubcaps.
Browless and proud: '82 J20 360/T18/NP208/3.73, Destination ATs, 7600 GVWR
Copper Polly: '75 CJ-6, 304/T15, PS, BFG KM2s, soft top
GTI without the badges: '95 VW Golf Sport 2000cc 2D
ECO Green: '15 FCA Jeep Cherokee KL Trailhawk
Reply With Quote
  #11  
Old 02-20-2014, 06:17 PM
Revhendo's Avatar
Revhendo Revhendo is offline
Grease Monkey
 
Join Date: Sep 11, 2011
Location: SoCal
Posts: 248
That is the part the OP is looking for. I needed one for mine also, but ended up scrounging one up. Is the Carlson number up above the right size? I tried a different number and it was just a skosh too small.
__________________
Rev.

OK, who put the magnet under my moral compass?

1988 Grand Wagoneer. Going for the ultimate fishing rig.
I named her Tinkerbell after my cat. She always demands my attention and whenever I show her love, I come away bloody.
Reply With Quote
  #12  
Old 02-22-2014, 04:55 AM
DBX11's Avatar
DBX11 DBX11 is offline
232 I6
 
Join Date: May 18, 2009
Location: Northern Kentucky
Posts: 208
Thats the one

Spring for the strut but 8 bucks on ebay is about what I paid for the entire kit it should have been in. I will try looking around the junk yard for a match. Its kinda funny that of all the springs that operate this brake assy the only one that was totally broken un usable was this one..... Thanks for the support guys.
Reply With Quote
  #13  
Old 02-22-2014, 08:06 AM
serehill's Avatar
serehill serehill is offline
Gone,Never Forgotten.
 
Join Date: Nov 22, 2009
Location: Mesquite Texas
Posts: 8,622
yup

That is the only spring that is no part of the kit I've bought them at Napa & O'Reilly both. you could find them junk yard hunting. Good luck.
__________________

80 Cherokee
360 ci 727 with
Comp cams 270 h
NP208
Edlebrock performer intake
Holley 4180
Msd total multi spark.
4" rusty's springs
Member, FSJ Prissy Restoration Association

If you can't make it better why waste your time. No use repeating the orignal mistakes. I'm to old to push it that's why.
Reply With Quote
  #14  
Old 02-25-2014, 01:01 PM
Carnuck's Avatar
Carnuck Carnuck is offline
 
Join Date: Feb 12, 2011
Location: Gold Bar, WA
Posts: 6,361
There are several different kits. Look for the complete kit.
__________________
Jeep gauges are for amusement only. Any correlation between them and reality is purely coincidental.
Reply With Quote
  #15  
Old 02-26-2014, 12:36 AM
Revhendo's Avatar
Revhendo Revhendo is offline
Grease Monkey
 
Join Date: Sep 11, 2011
Location: SoCal
Posts: 248
I've been through this with a couple of different vehicles lately. I'm not even sure why, it's just the way the dice landed. The only way I've been able to even get close is to pester my local parts store (a real one) and get them to let me play in there Carlson book. I have a couple of old Raybesto's books around here somewhere, I'll have to find them.
__________________
Rev.

OK, who put the magnet under my moral compass?

1988 Grand Wagoneer. Going for the ultimate fishing rig.
I named her Tinkerbell after my cat. She always demands my attention and whenever I show her love, I come away bloody.
Reply With Quote
  #16  
Old 02-26-2014, 09:24 PM
Hadaz Hadaz is offline
Member
 
Join Date: Feb 25, 2013
Location: Phoenix
Posts: 27
I am not sure if this is what you are looking at
http://www.the-jeep-guy.com/BRAKE%20...NG%2072-86.JPG

E-Brake Equalizer Bar Spring 11" Drum
Part # 16752.03
$2.00
Reply With Quote
  #17  
Old 02-27-2014, 09:20 AM
HAARubicon HAARubicon is offline
Member
 
Join Date: Dec 02, 2010
Location: Texas
Posts: 121
I just did the rear brakes on my 89 Grand Wag. I am not sure what year we are dealing with here. But the spring missing from my bag of parts was the spring that returns the e-brake. It sets between the brake shoe and the part that works the adjustment wheel. I reused the old ones. It is a soft spring that is large on the bottom and narrows toward the top and is held in with a dimple on the brake shoe.
Reply With Quote
  #18  
Old 02-27-2014, 11:33 PM
DBX11's Avatar
DBX11 DBX11 is offline
232 I6
 
Join Date: May 18, 2009
Location: Northern Kentucky
Posts: 208
Sill Nada

Got some heavy guage wire and gonna make my own spring. If it works I'll sell it to the companies and make millions no, billions of dollars and I'll still hang around this place and drive my jeep. When I get it running again.
Reply With Quote
  #19  
Old 02-28-2014, 01:36 AM
mdill's Avatar
mdill mdill is offline
 
Join Date: Nov 22, 2000
Location: Richfield MN
Posts: 7,076
Model shops sell spring wire in various gauges, spring making is some what of an art with annealing, forming, heat treating and tempering as well as picking the right base material to start with.
It is good to have a dream, good luck with that.

Quote:
Originally Posted by DBX11
Got some heavy guage wire and gonna make my own spring. If it works I'll sell it to the companies and make millions no, billions of dollars and I'll still hang around this place and drive my jeep. When I get it running again.
__________________
-----------------------------------------
Home of ADHD project list

1977 J-10 Honcho 360-T15-D20
1977 Cherokee WT 360-Th400-NP241 true-trac(s)
1979 Cherokee 4 Door 258-T-18-D20
1981 Cherokee Chief WT 360-727-NP208
1972 K20 Suburban 350 SM465 205
And the other stuff that gets driven
----------------------------------------
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Axle Swap and What I Learned (Part 1 of 2) Thomas792 General FSJ Discussion 1 12-03-2012 07:18 AM
Building a rear leaf spring pack. trail mule Off-Road FSJ Tech 3 01-20-2009 12:24 PM
Rear spring inboarding Questions LaJ10 Off-Road FSJ Tech 14 11-14-2006 11:26 AM
Article on Leaf Spring that may be interesting to some. Joker's '88 GW General FSJ Tech 2 10-28-2001 03:14 AM
Wide trac axles in a Wag(8 posts) Panther Drivetrain 0 08-18-2000 04:33 AM


All times are GMT -6. The time now is 07:15 PM.


Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
corner corner