edelbrock fuel injection

[AMX factor]

They are to be in stores in January. Most are estimating it at about $2500.

[hippymill]

anyone know if the new efi kits from edelbrock are out yet? any idea on the cost?

[Elliott]

Thank Tony Zamisch of CA Classics for helping bring that one about... it's been in work for awhile, but it didn't take all that long to get into production did it? [img]smile.gif[/img]

From: "Tony Zamisch" <tony.zamisch-at-gte.net>
To: "AMC List" <mail-at-amc-list.com>
Reply-To: mail-From-kevin-mordred.punk.net-at-amc-list.com
Subject: Edelbrock Pro-Flow For AMC
Date: Sat, 23 Nov 2002 21:28:43 -0800
X-ListMember: kevin-at-mordred.punk.net [mail-at-amc-list.com]

Listers, friends, and anyone else who cares,

I had a meeting today with Dennis Allen from Edelbrock. He and his Wife
came down to my house to discuss parts and one of the topics was making a
Performer RPM Pro-Flow Fuel Injection system for AMC V/8 engines. Here's the
scoop:

Edelbrock has a "futures" meeting coming up soon where they discuss what
new products to make, and one of them is the Pro-Flow for AMC. If you want
to see this system become a reality, send an e-mail, letter, or make a call
to Edelbrock. Just like the Air-Gap Intake became a reality, so can the
Pro-Flow. NOW is the time to speak up!

The system will consist of a newly designed AMC intake that will accept
the Pro-Flow system. The intake will be based (mostly) off of the newly made
Air-Gap, should flow 1500 to 7000, although there may be an option for "off
idle" to 5500, as is the case with small block Chevy, and other systems that
they make. The system would be a complete kit with fuel management
components.

In any event, if there is enough interest, thinks can get done. Show
them you are interested, and let's see if we can convince them to make the
Pro-Flow for AMC. Contact information is at www.edelbrock.com

Kind regards to all,
Tony Z.
California Classic AMC, Inc.