Kaiser jeep grill emblem
Collapse
X
-
Kaiser jeep grill emblem
1966 wag "JENNY" w/1973 drivetrain
330K miles w/360 V8 2bbl (HEI installed ), flowmaster muffler
TH400 /Dana 20 transfer case D30 /D44 w/ 3.73's LT235/75/R15 AT tires. lift shackles in frt. 2 in lft; w/ TAD's Dozer bumpers! Cost $700 -now total cost=?Tags: None
-
-
Sweet emblem. Congrats. Don't know how to mount it, though.
Saw another one like that on a '65 J3400 at a boneyard in Phx....didn't have a screwdriver on me, though.....79 J10 360-T18-D20 D44's 31X10.5 Edel 1406 w/R4B, speed
-despite thousands invested, 360 in putrid death dance-
"Buy the Ticket, Take the Ride."
-
-
I saw it on a post card for a super wagoneer on ebay...it showed that same emblem mounted on a razor grill.
I guess i will have to wait till it gets here to figure it out.1966 wag "JENNY" w/1973 drivetrain
330K miles w/360 V8 2bbl (HEI installed ), flowmaster muffler
TH400 /Dana 20 transfer case D30 /D44 w/ 3.73's LT235/75/R15 AT tires. lift shackles in frt. 2 in lft; w/ TAD's Dozer bumpers! Cost $700 -now total cost=?
Comment
-
-
I had one on my razor grill. The one that was on my razor grill and the one that is on my rhino are slightly different. The one on the razor was thicker. They mount the same way though.
[ August 03, 2003, 06:43 PM: Message edited by: porkchop ]
Comment
-
-
The original mount had an additional spacer that the emblem mounted to. Then the spacer fit between two of the grill slits. It will fit but will be facing at an angle down.
[ August 03, 2003, 06:49 PM: Message edited by: Big Red ]1979 Cherokee WT, 360 4 barrel T18, Dana 20 twin-stick, SOA with a RB Shackle Flip, 4.27s, Hydroboost brakes, TFI upgrade, J-10 Rear axle w/rear Caddy disc brakes and 37" MTRs
Comment
-
Comment