International Full Size Jeep Association
Home Forums Reader's Rigs Tech Library Trail Stories FSJ-List
International Full Size Jeep Association  

Go Back   International Full Size Jeep Association > Tech Archives > Other

Reply
 
Thread Tools Display Modes
  #1  
Old 09-09-2008, 09:07 AM
Gambler68's Avatar
Gambler68 Gambler68 is offline
Rabble Rouser
 
Join Date: Feb 29, 2004
Location: Ignacio, Colorado, USA
Posts: 14,082
Rebuilding a metal Gladiator era Heater Core Box w/ pix (tech)

Well it looked ok from the outside, but I wanted to resurface the flappers with neophrene so it wouldn't be blowing hot air during the summer like so many do..they do this because the air flow flaps on the core AND the inner blower box are lined with foam that degrades over time and don't seal. After checking that the vac switches were still good I went ahead and got busy..

First the inner box. In very nice shape for being 40 years old. Still had the inspection stickers on it.









Next the heater core box. Simply dumping out the leaves is NOT good enough..you need to open it up. It's easy.


looks good right?

ick!

ack!

don't lose these. They are the main reason for all the rust gunk in there.

see how the flapper foam seal is useless at this point from time

leave the flapper in there and remove the airflow thingy

scrape it clean with a chisel or whatever

I used neophrene from a knee brace that was laying around..

sorry camera was in night mode. But you can see the nice seal now. Do both sides of course.

look at that NICE clean core. I flushed mine out in the shower and sprayed the fins out with normal pressure hot water. A few good flakes came out and some assorted gunk. Be sure to really get the inside clean and move it around while water is flowing. Re-install pieces in reverse order of disassembling (maybe I should go work for Haynes eh?)



Inner box got RTV. Didnt bother with the outer seal.

put back together. Sadly I had to reuse original 1/4" head screws, added some larger ones where they had wallowed out.

painted! I will add foam to the inlet/outlet and around the fresh air inlet and blower outlet later when I install

speaking of..does it still work? Yes! Battery jumper with on/off switch confirms.

paint it black!

Hope this was helpful to anyone wondering. Early style metal boxes do not swap. That bottom piece on the blower is absent in the later style, so they do not line up if you try and mix and match. I would assume if you replaced the ENTIRE HVAC system (newer style into an older cab) it would work of course..but where's the fun in that. Plastic sucks.
__________________
1979 Chero S "Sundog" 1979 Chero S "Hammer"
1968 327 J3000 1978 J10SWB
The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.
Hunter S. Thompson .

Reply With Quote
  #2  
Old 09-09-2008, 09:35 AM
tgreese's Avatar
tgreese tgreese is offline
 
Join Date: May 29, 2003
Location: Medford MA USA
Posts: 10,863
Heh. Somehow your write-up reminds me of the Rolling Stones.

Very nice - thanks for posting.
__________________
Tim Reese
Maine beekeeper's truck: '77 J10 LWB, 258/T15/D20/3.54 bone stock, low options (delete radio), PS, hubcaps.
Browless and proud: '82 J20 360/T18/NP208/3.73, Destination ATs, 7600 GVWR
Copper Polly: '75 CJ-6, 304/T15, PS, BFG KM2s, soft top
GTI without the badges: '95 VW Golf Sport 2000cc 2D
ECO Green: '15 FCA Jeep Cherokee KL Trailhawk
Reply With Quote
  #3  
Old 09-09-2008, 10:04 AM
red mistress's Avatar
red mistress red mistress is offline
304 AMC
 
Join Date: Sep 13, 2007
Location: TX
Posts: 2,295
heater core

The heater cores from early years are little different than the new ones.

Spacing of heater tubes and the thickness of the core.

Newer heater core can be made to work with carbide cutter, but treasure hunting & finding a NOS one is so much fun.

I think I need Laura Croft on my treasure hunting team.
__________________
67 Gladiator 15K J3000 AMC 327, PTO, 35" BFG's
69 Jeepster 8701 convertible
80 Honcho Sportside
82 CJ-8 75K org SR decals
82 Cheroeke Laredo 24K
83 CJ-8 50K 401, ARB60's, F&R Winch, 38"
84 CJ-7 38K Garnet Int., Jeep 8274 winch
84 CJ-8 mud Scrambler
87 J 20 36K smooth alum camper & boat rack.
Reply With Quote
  #4  
Old 09-09-2008, 10:18 AM
orangecherokee's Avatar
orangecherokee orangecherokee is offline
 
Join Date: Aug 17, 2002
Location: Kingsport, TN
Posts: 5,415
If anyone needs a heater box, blower motor or under dash vent system let me know. I just stripped all of this out mine and don't need it anymore.
__________________
Places to Wheel in the Southeast

Quote:
Originally Posted by Topgun2mo
I would think boxing would limit the amount the frame could flex over obstacles which I think IMO would be a bad thing. I would think you would want all the articulation possible.
Quote:
Originally Posted by johnny019
I'm not saying lockers don't improve the performance of your rig, just that they're overrated.
Reply With Quote
  #5  
Old 09-09-2008, 12:16 PM
budojeepr budojeepr is offline
Master Mechanic
 
Join Date: Feb 02, 2006
Location: Redding, CA
Posts: 933
Somebody "sticky" this!
__________________
Don't be yourself. Be someone a little nicer. -Mignon McLaughlin, journalist and author (1913-1983)
Reply With Quote
  #6  
Old 09-09-2008, 12:38 PM
Gambler68's Avatar
Gambler68 Gambler68 is offline
Rabble Rouser
 
Join Date: Feb 29, 2004
Location: Ignacio, Colorado, USA
Posts: 14,082
Quote:
Originally Posted by budojeepr
Somebody "sticky" this!

there is a thread stickied for Tech Archives in the index in this forum. If someone deems it worthy, feel free to reply there with a link to this thread.

Hopefully this thread will help save a few of the old metal boxes! I'm sure rad shops will rebuild them but since its so easy and doesnt take long to rehab it yourself, why spend the $$
__________________
1979 Chero S "Sundog" 1979 Chero S "Hammer"
1968 327 J3000 1978 J10SWB
The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.
Hunter S. Thompson .

Reply With Quote
  #7  
Old 09-09-2008, 12:53 PM
hummer010's Avatar
hummer010 hummer010 is offline
Member
 
Join Date: Jul 26, 2007
Location: The Great White North
Posts: 192
Awesome thread! My heater core, inner box and blower are all out of the truck right now. I was planning to do this very thing in the next little while, so very helpful thread.

I like the shot of the NBA too - one of my favourites
__________________
68 j3000 327/T18/D20 Work in Progress
Reply With Quote
  #8  
Old 09-09-2008, 02:05 PM
fulsizjeep's Avatar
fulsizjeep fulsizjeep is offline
Señor Jackhead
 
Join Date: Aug 21, 2002
Location: Jubilee Jeeps.SWCO
Posts: 22,224
nice work & documentation
__________________
Flint
Ran when parked.
http://jubileejeeps.org/quadratrac
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s and a few Evil Twin mods, http://eviltwinfab.com and a few TT's Fabworks mods, http://www.ttsfabworks.com
76 401 Wag, 77 401 Wag, 77 401 J20
Reply With Quote
  #9  
Old 09-09-2008, 02:32 PM
men in black's Avatar
men in black men in black is offline
360 AMC
 
Join Date: Jul 08, 2006
Location: Grand Blanc, Mi
Posts: 3,498
X2 on nice write up

you needed a couple Newcastles after that.
__________________
1990 Grand Wagoneer.. black with sand interior..
Razor grille, Hella H4 headlights, Piaa driving, LED spider taillights, tinted windows.
Full Corinthian leather front and rear seats, custom full length center console with cup holders. 100 sf of Fatmat on floor.
Edelbrock intake and 2132 cam, Howell TBI, Ford Distributor Cap, TFI Ignition Coil, Desmogged















Reply With Quote
  #10  
Old 09-09-2008, 02:51 PM
skeletor's Avatar
skeletor skeletor is offline
350 Buick
 
Join Date: Jan 31, 2006
Location: richmond, va
Posts: 1,364
thats amazing that the heater core is still there. when i did mine, half of it had dissolved into mush and the tubes broke off when i touched it. i still whish i had painted the box before i reinstalled it though.
__________________
-bryan

1984 j10 LWB
1977 Cherokee chief wide track(sold)
2004 LJ
Reply With Quote
  #11  
Old 09-09-2008, 07:42 PM
Lindel's Avatar
Lindel Lindel is offline
Perfesser of Jeepology
 
Join Date: Jun 15, 2000
Location: Carpentersville, IL 60110
Posts: 9,204
The one I slapped in the 79 looked a lot like that before I installed it. I didn't go to the trouble of repainting it, I was doing a quick install to get rid of the gaping hole that was in the fiberglass box.

Nice work Ryan!
__________________
Jeep Grounds
RRV Homepage
Texas Full Size Jeep Association
1987 Grand Wagoneer
AMC 360/TF727/NP229
1999 Wrangler Sport
4.0L/AX-15/NV231


Quote:
“Freedom is never more than one generation away from extinction” by Ronald Reagan.


Formerly of DFW/Gun Barrel City, TX - eventually to return...
Reply With Quote
  #12  
Old 09-09-2008, 09:06 PM
SnowShoe's Avatar
SnowShoe SnowShoe is offline
350 Buick
 
Join Date: Feb 24, 2008
Location: Grapevine, TX
Posts: 1,229
Thumbs up

Very impressive...may have to make same for mine...
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 09:34 AM.


Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
corner corner