Drove my truck 30 miles to the shop and onto the lift - no prob. Installed 4" skyjacker, 35's, 4.10's and posi to boot .. no problem.
Take the truck off of the lift for the test drive and the tranny has taken a sdump. Itt'l go into drive (1st) and reverse. When I dropped it into drive and took off it'll haul *** untill it tries to shift into second, then it clatters around and locks up the rear wheels it does the same when I drop it into second directly. no power and locksup the wheels. The transfer canse/tranny makes a crap load of noise at the same time..
QUESTION IS... if I gotta rebuild/replace the tranny. Is there a tough aftermarket alternative for the 727 that'l bolt up to my 360/x-fer combo? or would a rebuild be my best most economic option. I don't want it to brfeak again...
Any help would be great.
__________________
83 \'Wag<br />AMC 360/ MSD/ Cam/ 650 Holley 4bl.<br />4\" Skyjacker w/35\" MTR\'s<br />plasma cut fenders <br />4.11 with posi<br />Durabak interior<br />Custom front bumper/tank
|
Threaded Mode